Latest activity
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.I have only one nic per node, and one linux bridge configured. I did not create a an extra VLAN or sth. on proxmox. The Network attached itself provides several VLANs as the hostes Container and VMs are located in several VLANs.
-
Jj.gelissen replied to the thread Write Back (safe) + Pure Storage – sinnvoll für produktive Windows-Server?.Das ist aktuell bei mir aus weil bei der Migration ist das im Standard immer aus. Kann man das nachträglich aktivieren? Ist das gefährlich wenn es aus ist? Weil du geschrieben hast essenziell
-
EEduardo Taboada replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.To know which is the cause of this problem: Do you have a separate VLAN or network for Ceph? Check the network interfaces for errors, and also the smart values of disks
-
Sssmsp replied to the thread Proxmox 8.0.4 doesn't see: ASUS XG-C100C 10G Network Adapter PCI-E x4 Card.This was a lost cause; the manufacturer doesn't make the Debian driver in a package you have to compile your own. I wound up using this, it worked perfectly plug and play, basically any card with an Intel X540 controller will 100% work...
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Hi, by using that command I can fully deaktivate that check, if done, yes it is back to green. But if I activate it again, the warnings are back. So I can only decide to "deactivate" that check? By that I would loose some early warning? Would'nt...
-
JJamieColors posted the thread [TUTORIAL] Proxmox install on Optane PMEM 100 in Proxmox VE: Installation and configuration.Hello! First off, I know this isn't "officially supported" or such... but I think it's worth a try here. I've been trying to install Proxmox on Optane PMEM 100's for a while now and well the installation is quite simple actually by just adding }...
-
EEduardo Taboada replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Is not a critical error, blueStore has recovered the failure, and the cause can be a puntual problem with the network, or some hardware element (controller, disk) but it appears to be for a low response of these OSD. To remove the warning: ceph...
-
BBluemeus replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Today i tried again, after i freed the space, rebooted everything and startet a migration by PDM but without success. The error is still the same and i have still no idea, why it is not possible to migrate the storage. 2025-12-12 19:35:21...
-
SSteveITS replied to the thread 40 node prod cluster restarts when joining a new node or removing..Based on my experience with a small cluster when we were getting started, we had no issues doing it on a live system and following the directions. We added another link then as a second step changed the order as I recall, so the new one was...
-
Ttkw posted the thread PBS Sync stalls after recent v4.1.0 upgrades in Proxmox Backup: Installation and configuration.I've got PBS VMs on each of my two PVE hosts and the hosts backup to the other host's PBS VM as part of my home lab. Once a day, at different times, each PBS VM does a pull sync of the content from the other PVE host as an extra copy. This...
-
Gguddi_ replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.Hi @Eduardo Taboada I check your link, but when I do execute the command to show the crash id's I do not get any response. It's emty. So maybe no "crash" yet :( Linux prx1 6.17.2-2-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-2 (2025-11-26T12:33Z)...
-
Aaomer786 replied to the thread 40 node prod cluster restarts when joining a new node or removing..@SteveITS Thank You! Currently even if we try to remove a node the entire cluster reboots. Perhaps,we need to setup the new link before we can proceed. I wonder if adding a new link in a running cluster can cause the cluster needing or causes to...
-
PPouch6867 posted the thread [SOLVED] Ceph Cluster vlan migration help requested in Proxmox VE: Installation and configuration.EDIT: SOLVED! https://forum.proxmox.com/threads/ceph-cluster-vlan-migration-help-requested.177942/post-824528 So I've been trying to move the ceph network to it's own dedicated vlan11 from where I initially stood this up on vlan1. Every time I...
-
SSteveITS replied to the thread 40 node prod cluster restarts when joining a new node or removing..@aomer786 There have been various posts here about max cluster size, like the one linked above. The concern with corosync is latency not bandwidth. So if enough milliseconds go by the node is considered to not be responding. A NIC can't send...
-
EEduardo Taboada replied to the thread Move PBS backup to new 10G nic..There is no reason to loose backups, because you only are moving the storage network, not the storage itself. I mean, for example if you put another PVE and add storage pointing for this datastore yo can see all the backups of the first PVE. The...
-
BBu66as replied to the thread KMS installieren unter Proxmox.@Falk R., absolut korrekt. Der Bezug über einen "örtlichen Händler" spricht fast immer für OEM/SB-Ware, die keinen Zugang zum M365 Admin Center (ehemals VLSC) und somit keine KMS-Host-Keys beinhaltet. @Martin_Abr, ergänzend dazu: Da dein...
-
BBu66as replied to the thread Live-Migration von VMware ESXi zu Proxmox – möglich mit Pure Storage (iSCSI Multipath)?.Hallo @Falk R., da bin ich ganz bei dir – eine echte Live-Migration (vMotion) ist hypervisor-übergreifend bei unterschiedlichem Storage nicht machbar. Ergänzend dazu für @j.gelissen: In den aktuellen Versionen (Proxmox VE 9.x) bietet der...
-
BBu66as replied to the thread Backup-Restore (teilweise) auf andere Festplatte zurückspielen.@Skream, ich schließe mich @Falk R. an: Das klingt stark danach, dass die neue Disk in der Boot-Reihenfolge der VM noch nicht aktiv ist oder durch das Hinzufügen eine neue ID (z. B. virtio2 statt virtio0) bekommen hat. Prüfe bitte unter VM >...
-
BBu66as replied to the thread PBS als VM oder als LXC ?.Hallo @Impact, guter Punkt mit dem externen Backup. Ergänzend dazu ist mir in den Screenshots von @ioB_Newcomer noch ein potenzieller Stolperstein aufgefallen: In den Dialogen zur Erstellung des Mount Points (z. B. Bild 1 und 5) ist die...
-
EEduardo Taboada replied to the thread CEPH Probleme : 2 OSD(s) have spurious read errors.This may help you https://forum.proxmox.com/threads/osd-have-spurious-read-error.100443/