Latest activity

  • B
    Bu66as replied to the thread Exzessive Kernel Log Meldungen.
    Das Melden upstream ist sicher der sauberste Weg, wie @fabian schreibt. Da du sagst "keine aktuellere Firmware": Prüf bitte sicherheitshalber, ob du wirklich auf BIOS Revision 3.4a (Mai 2021) bist. Supermicro hat für die X10er Serie sehr spät...
  • B
    @JensF, das Neuanlegen ist sicher der schnellste Weg, wenn es nur am Job liegt. @drnicolas, falls die VM 301 aber hartnäckig als "Ghost" im Cluster-Index (/etc/pve/.vmlist) verbleibt, obwohl sie gelöscht sein sollte, hilft oft dieser Trick, um...
  • H
    For my part, I chose to roll back to an older kernel version because I need to guarantee the stability of my production environment — the network must remain reachable at all times. I haven’t seen any information about a fix.
  • B
    Hallo @Petbotson, danke für das finale, wenn auch ernüchternde Update. Damit ist @Falk R. s Einschätzung aus Post #5 nun leider offiziell der einzige Weg. Zu deiner Frage: Wir setzen in Proxmox-Umgebungen (auch auf AMD EPYC) sehr erfolgreich...
  • B
    Hallo @CarstenMartens, Proxmox integriert Updates von acme.sh üblicherweise über Aktualisierungen des Pakets libpve-acme-perl. Wenn die Änderung bereits im Upstream-Master ist, landet sie meist zeitnah im Repository. Bis dahin hilft oft nur...
  • B
    Dazu gab es schon unzählige Threads, dass man im Windows die virtio Treiber Bootfähig installieren muss, mit einem zusätzlichen SCSI Gerät oder einem extra Tool. Windows macht einen Treiber, auch SCSI erst bootfähig, wenn das laufende Windows...
  • B
    Hallo @noidea, der Anstieg des Swap-Verbrauchs ist in Kombination mit der hohen Uptime (99 Tage) und dem Löschvorgang normal. Linux nutzt freien RAM bevorzugt als Cache für Dateisystem-Operationen (was beim Löschen vieler Dateien intensiv...
  • B
    Bu66as reacted to Falk R.'s post in the thread PiHole with Like Like.
    Ich möchte dir nicht zu nahe treten, aber ich kenne viele Admins, die als Quereinsteiger unfreiwillig in die IT gerutscht sind und nicht so viel Know How mitbringen, aber alle schaffen es unfallfrei ein AD oder DNS/DHCP zu bedienen. Wenn es um...
  • B
    Hallo @Falk R., der Hinweis mit den Lanes ist wichtig, aber das Log zeigt hier ein noch viel kritischeres Problem: Der Fehler EXT4-fs error (device-dm1) bedeutet, dass das Dateisystem des Proxmox-Hosts (Root liegt meist auf einem LVM-Volume wie...
  • L
    I have an HP elite mini 800 G9. I used two cheap M.2 SSDs, and I created a mirror for boot/OS/VM storage, all on one pool. I do my backups to my NAS. Works well, and if one drive dies, the machine will still keep running. I would use the normal...
    • 1765560073302.png
  • B
    Bu66as reacted to Falk R.'s post in the thread VMware migration zu Proxmox Windows with Like Like.
    Ich bin mir nicht sicher worauf die WWID verweist. Ich nutze immer /dev/mapper/mpathX Devices. Das sind dann eindeutig die Multipath Devices. Ich kenne solche Probleme, wenn man ein SCSi Gerät, was einen Pfad darstellt, benutzt und der Controller...
  • B
    Bu66as replied to the thread [SOLVED] Laufwerk fehlt Speicher.
    Das Phänomen liegt, wie von @Impact vermutet, an den "Reserved Blocks" des ext4-Dateisystems. Standardmäßig werden 5% des Speicherplatzes für den root-User reserviert, damit das System auch bei voller Platte noch booten und Logs schreiben kann...
  • J
    I was unable to get doca 3.2 to work with proxmox 9.1 so I had to revert the whole host back to 8.4. The passthrough throws a lot of errors
  • J
    I checked, the latest versions of the virtio-fs are incompatible with samba windows acls, I tried both proxmox 9.0 and 8.4. I had to migrate my shares to a zvol from virtiofs becuase of this
  • B
    Ich glaube, das ist, was @meyergru erwähnt. Mit PVE 9 haben wir die Zeitabstände, über welche die Messdaten aggregiert werden, kürzer gesetzt. Wie in den Release Notes erwähnt https://pve.proxmox.com/wiki/Roadmap#Proxmox_VE_9.0 Wenn man deinen...
  • B
    Hallo @plentman, dass die Intel e1000e-NICs (oft I219-LM) mit neueren Kernel-Versionen in PVE 9 Probleme machen („Hardware Unit Hang“), ist leider ein bekanntes Phänomen. Der Verbleib auf PVE 8 ist hier die stabilere Wahl. Bezüglich deiner...
  • B
    Hallo @Eggi, das Problem liegt höchstwahrscheinlich im Feld "Unterverzeichnis". Du hast dort einen absoluten Pfad (/Daten NAS QNAP...) eingetragen, wie er vermutlich intern auf dem QNAP-Dateisystem aussieht. SMB-Freigaben funktionieren aber...
  • B
    @Falk R., gute Zusammenfassung ;) @sala82 Ergänzend dazu: Der Importer kopiert/synct die Daten vor (oder während) dem Start, was IO-Last erzeugt und Zeit kostet. Die NFS-Methode mountet die existierende Disk sofort (Mapping). Du hast also keine...
  • L
    Anyone else who had this issue had it again per-chance? Debating re-activating my onboard NIC and connecting to see if this now resolved within the kernel.
  • UdoB
    Obviously, I meant "not in a sensible way" - at least for what the OP asked for, namely to increase his storage from 2x the size of one of his physical disks, so using 5 disks either does not use one of them, thus not increasing the net size...