Latest activity
-
Ttplecko posted the thread Yet another certificate problem in Mail Gateway: Installation and configuration.Using PMG 9.0.1, but the problem is the same for as long as I know of PMG. Before, we resolved the issue by placing a ssl offloader in front of PMG, but that solution is bad, as PMG has the ability to use certificates. We're using our own CA...
-
HHeracleos reacted to LKo's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with
Like.
Ok, 6.16.0 and 6.16.12 were both fine, but I tested each only once, so it might not have triggered. Back on 6.17.11-2-test-pve and we get the stall once again. What's interesting this time, prx-hanspeter got stuck and then recovered after 17... -
Ssanta_on_a_sledge replied to the thread Proxmox cloning corrupts the target image - extensive analysis included.Here is the clone task log: create full clone of drive efidisk0 (nvme-lvm-thin:vm-9000-disk-0) Rounding up size to full physical extent 4.00 MiB Logical volume "vm-1001-disk-0" created. Logical volume proxmox_vg0/vm-1001-disk-0 changed...
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Ok, 6.16.0 and 6.16.12 were both fine, but I tested each only once, so it might not have triggered. Back on 6.17.11-2-test-pve and we get the stall once again. What's interesting this time, prx-hanspeter got stuck and then recovered after 17...
-
Jjt_telrite replied to the thread TrueNAS Storage Plugin.it seems that when I created a VM with Cloudinit device and moved it to "dev-stor" , realized that it wouldn't boot with the ISO stored on iscsi, deleted the device from the VM, it created an "orphaned" item. when I try to remove the device from...
-
Uuzumo replied to the thread 8700G iGPU 780m passthrough.Thanks Even though some issues remain, since what I really want is for it to withstand VM restarts, I'll try that.
-
MMcHammer replied to the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2.Jep.. Danke... dann muss ich ja jetzt wahrscheinlich nur noch meine APT-Listen aufräumen... das aber erst nach dem Backup...
-
Falk R. replied to the thread NAS UGreen DXP4800 Plus.Nicht vergessen, bei einem Netzwerkshare kannst du mit verschiedenen Protokollen auf den gleichen Share zugreifen. Bei Windows SMB und Linux mit NFS. -
MMcHammer replied to the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2.ging nicht - Error 500. Habe die Kiste geclont nun laufen alle wieder... Werde mir nun gleich noch den PBS dediziert installieren und mal Backups machen... Hatte bis vor 2 Tage keinen Platz auf meinem NAS dafür.. kommt nun - leicht verspätet ;)...
-
Mmrmrv replied to the thread 8700G iGPU 780m passthrough.For me windows restart is working fine. (assuming it goes via the proxmox restart, had mixed results with rebooting via windows inside the vm) In some instances rebooting proxmox is hanging though. It is not consistent, mostly when I used the...
-
Falk R. replied to the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2.Was steht denn bei der VM? In der Regel reicht es HA disable und danach wieder an machen für die VM.
-
Aaomer786 replied to the thread 40 node prod cluster restarts when joining a new node or removing..Hello, Thank you for your response. We will look into your suggestions.
-
Jjtru reacted to guruevi's post in the thread Any known downsides for using cpu/memory hotplugging? with Like.
Here is what VMware says about it: https://blogs.vmware.com/cloud-foundation/2021/06/19/cpu-hotadd-for-windows-vms-how-badly-do-you-want-it/ It works on Linux. If your application supports it is another issue. NUMA balancing may be an issue...
-
UThe critical ones I changed disable: above4G decoding, resize BAR support & SR-IOV i did not load the soundcard bios, it PVE crashes with that enabled I had difficulties loading the grapical windows drivers, they complained about the chipset not...
-
UThis is how the card is seen from inside the VM
-
Uuzumo replied to the thread 8700G iGPU 780m passthrough.Thank you. It's working except that it won't restart, but I was having trouble because it kept turning into a green screen when I tried to restart it. I'll try implementing your settings.
-
Cchristophe posted the thread Host storage used : happy to discover I have 1PiB!! in Datacenter Manager: Installation and configuration.Hi all, And let me thank Proxmox Devs and Team for PDM, another great software. One problem in remotes screen : host CPU is ok, host memory used is perfect, but host storage usage... It adds all capacities of all storages, and multiplicates by...
-
Uuwka77 replied to the thread NAS UGreen DXP4800 Plus.Ja, ich muss das mal mit meinem ESXi-Server oder Proxmox testen, da habt ihr recht. Korrekt, ich mounte das mit dem Windows NFS-Client ohne angepasste Optionen. Leider kann ich die NFS-Version beim Mounten nicht beeinflussen, sonst hätte ich es...
-
MMcHammer replied to the thread [SOLVED] kaputtes CEPH nach Upgrade auf PROXMOX 9.1.2.Hi.. Vielen Dank für Deine bisherige Unterstützung.. Ich habe nun apt-get update sowie upgrade auf alles Nodes durchgeführt.. anschliessend auf allen Nodes: Ergebnis: pveceph install --repository no-subscription HINT: The no-subscription...
-
-
Uuzumo replied to the thread Temperature.So, assuming we add lm-sensors and various sensor configurations, who do you think should provide support for them? If you want items displaying lm-sensors values, you need lm-sensors itself. Items that won't display if it's not installed serve...
