Latest activity
-
aaron replied to the thread vUSBPB - a virtual USB Power Button for Proxmox VM.Ha, that sounds like a fun idea to make it all more physical/haptic. I haven't tested it, but have you seen changes in the USB port numbering on reboots? Also for example if a USB hub is used? -
KKuba.Bolsa replied to the thread vUSBPB - a virtual USB Power Button for Proxmox VM.You are welcome :-) My sons have the same setup – one physical computer, two graphics cards, four monitors – and there was a problem when one of them shut down his VM.
-
bbgeek17 replied to the thread Can not create snapshot it says already exists.You should start by checking your LVM structure: lvs lvdisplay etc I am not sure how you got into this state, backtracking your steps may be a good idea. If there is an edge case of snapshots being orphaned, I am sure developers would like to... -
Ffertig replied to the thread New Proxmox box w/ ZFS - R730xd w/ PERC H730 Mini in “HBA Mode” - BIG NO NO?.It was indeed an incorrect regex in the multipath.conf file. Zpool is surviving the reboot now, after I completely changed the filtering/blacklisting in multipath.conf
-
MMichiel_1afa posted the thread Uploading ISO's to a different server in the cluster fails. in Proxmox VE: Networking and Firewall.This is a bit of a meh.. issue easy to work around, but would be nice to find out whats going on. Affects: at least PVE 8 & 9 - exact patch version does not matter. - File size in this case does not matter, happens with any size image...
-
Mmikiz posted the thread Can not create snapshot it says already exists in Proxmox VE: Installation and configuration.Hi, I can not create snapshot named test.The error says it's already exist.I deleted test snapshot before but snasphot file remnant has in /dev/LUN01.What should i do?
-
-
FFlobo posted the thread Monitoring Running Jobs / Job Duration in Proxmox Backup: Installation and configuration.Hi there, i am currently looking for a way to Monitor the Runtime of Tasks ( Verify / Prune / GC / Backups ), one idea was to use the Notifications for that, but unfortunerally the Duration Time of the Jobs are not given with the Variable...
-
-
JJohannes S reacted to fabian's post in the thread Least privileges option between PDM & PVE/PBS with
Like.
that depends what kind of actions you want to do over PDM. you can give it audit access only, then it will only be able to see things but not change them. if you want to start/stop/.. guests, you need to give it power management privileges on... -
Ccosme replied to the thread QEMU 10.1 available on pve-test and pve-no-subscription as of now.Hello. Am I mistaken, or does QEMU 10.1 support the live migration of machines with clipboard enabled? https://gitlab.com/qemu-project/qemu/-/commit/42000e0013709f21b54f71b63525c22cb6b92d5d I ask because Proxmox seems to still be blocking...
-
-
Nns33 replied to the thread Frr update to 10.4.1-1 broke external routing?.I'm not sure if it occurs in other zones. Honestly, nothing is configured to use the other zones. In the end, all zones will have exits nodes defined, and the plan is to have multiple for the load balancing. I don't have any firewalls enabled...
-
Ffufufighter replied to the thread [PVE9.1|OVS|LACP] Issues with interface pinning and openvswitch LACP on fresh install.Hi shanreich, I don't have the exact non-working config anymore but I have an intermediate one while I was troubleshooting, let me know if that works for you. Please note that at this point the two NICs weren't both yet in the bond for...
-
Bbedeberger reacted to bialykostek's post in the thread [TUTORIAL] NVIDIA drivers instalation Proxmox and CT with Like.
Hi! I post step by step tutorial how to install NVIDIA drivers on Promox server. I hope it will be usefull for someone: 1. Blacklist nouveau: vi /etc/modprobe.d/blacklist-nouveau.conf 2. Paste, save and quit: blacklist nouveau options nouveau...
-
TTaledo reacted to fabian's post in the thread Least privileges option between PDM & PVE/PBS with Like.
that depends what kind of actions you want to do over PDM. you can give it audit access only, then it will only be able to see things but not change them. if you want to start/stop/.. guests, you need to give it power management privileges on...
-
Eebiss reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
All the most recent installers of all our projects released this quarter include network interface pinning settings and pin by default to nicX. You can simply untick the "Pin network interface names" chechbox in the network step, or edit the...
-
Eebiss reacted to Kuba.Bolsa's post in the thread vUSBPB - a virtual USB Power Button for Proxmox VM with Like.
Hi everyone! I wrote and shared a small program for Proxmox (I called it vUSBPB) that allows you to turn on a selected virtual machine using a virtual button on your computer - without using a console or GUI. All you need to do is plug any (or...
-
MMcShadow posted the thread API Token Not Removed After Deleting PDM Remote Probe in Datacenter Manager: Installation and configuration.Hi, I'm currently evaluating Proxmox with a three node cluster (pve[1-3] - VE 9.0.3) and a single PDM (version 1.0) instance. To manage my cluster, I added a remote probe (pve1) in PDM which created an API-Token on my cluster with the default...
-
LLongQT-sea reacted to Kuba.Bolsa's post in the thread vUSBPB - a virtual USB Power Button for Proxmox VM with Like.
Hi everyone! I wrote and shared a small program for Proxmox (I called it vUSBPB) that allows you to turn on a selected virtual machine using a virtual button on your computer - without using a console or GUI. All you need to do is plug any (or...
-
LLongQT-sea replied to the thread vUSBPB - a virtual USB Power Button for Proxmox VM.This is really cool! I often set up a single Proxmox host with 2–3 VMs, each with a physical monitor, keyboard/mouse, and GPU passthrough for different users. This will definitely help. Thanks!
-
LLongQT-sea replied to the thread iGPU HD530 passthrough issue on PVE 9.Sorry for digging this post up. I also have UHD 630 (i7-9700), and this is one of many guides that has worked for some users, even on PVE 9: https://github.com/LongQT-sea/intel-igpu-passthru
-
JJohannes S reacted to MarkusKo's post in the thread Does Proxmox have a HCL (Hardware Compatibility List)? with Like.
Hi riahc3 There is no offical PVE HCL but PVE uses a modified Ubuntu Kernel you can check the Ubuntu HCL. PVE9 currently uses Kernel version 6.14 (Ubuntu HWE) and you can opt-in for a 6.17 Kernel. Just be aware that the Ubuntu HCL, as you...
