Latest activity
-
Mmichauko replied to the thread Migrating with Conntrack doesn't work after Updating to 9.0.5.Hi there, just googled here. I upgraded 2 days ago to latest PVE 9 and discovered this problem too. Both nodes have the same releases for all modules in pveversion -v ; qemu-server 9.1.1 here. # pveversion -v proxmox-ve: 9.1.0 (running kernel...
-
Ttemplar replied to the thread Temperature.And there is already code in that direction, submitted for inclusion: https://bugzilla.proxmox.com/show_bug.cgi?id=208#c23 It's a halfway, but it would be already a good step. But it doesn't get enough attention.
-
EEduardo Taboada reacted to msp's post in the thread [SOLVED] Dell PowerEdge R630 reboots immediately on kernel 6.17.2-2-pve (PWR2262 / CPU0704 / UEFI0078) with
Like.
Thank you very much for your replies. I can confirm that setting X2APIC, and IOAT DMA to enabled, solved the issue, now kernel 6.17.2-2 boots normally. I do NOT have Secure Boot enabled and SR-IOV is enabled. -
EEduardo Taboada reacted to jjc1984's post in the thread Proxmox VE 9.1 Installation on Dell Poweredge R630 with Like.
My Apologies. I've set this exact config and now works fine https://forum.proxmox.com/threads/dell-poweredge-r630-reboots-immediately-on-kernel-6-17-2-2-pve-pwr2262-cpu0704-uefi0078.177201/post-821716
-
Uuzumo replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.I believe hv_passthrough includes all other settings starting with hv_. Since I'm unsure if other options not starting with hv_ are also required, please remove them and configure using the following command: qm set VMID -args '-cpu...
-
CCAAD replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.I manage to boot the VM without the code 43 error . However things are not right. hostpci0: 0000:01:00.0,pcie=1,x-vga=1 hostpci1: 0000:01:00.1,pcie=1 CPU-Z and task manager does not show a gpu online. It is a false reading, even though device...
-
Jjefm reacted to m1rch1's post in the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread with Like.
Thank you and Merry Christmas to you as well @futiless . Incredible effort. I have the exact same MS-A2 that I bought with 64GB RAM in May thinking I will buy another 64GB in future. How naive, now that, that same stick is 3-4 times as...
-
Jjefm reacted to futiless's post in the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread with Like.
Windows conf ##args for args -cpu kvm=off,hv_vendor_id=proxmox' ##OCT22args -cpu 'host,hv_passthrough,level=35,-hypervisor,+svm,' ##args -device virtio-iommu-pci,bus=pcie.0,addr=1e.0,ats=on,caching-mode=on, -cpu...
-
CCAAD replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.root@pve:~# qm start 101 /var/lib/vz/snippets/ryzen_igpu_reset.sh: line 11: /sys/bus/pci/drivers/amdgpu/unbind: No such file or directory /var/lib/vz/snippets/ryzen_igpu_reset.sh: line 12: /sys/bus/pci/drivers/snd_hda_intel/unbind: No such file...
-
CCAAD replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.Well, with everything set as the above, I'm still getting the code 43 on VM startup. @uzumo Can you please look over my config, see if you spot any issues? windows 10 vm conf args: -cpu...
-
Jjjc1984 replied to the thread Proxmox VE 9.1 Installation on Dell Poweredge R630.My Apologies. I've set this exact config and now works fine https://forum.proxmox.com/threads/dell-poweredge-r630-reboots-immediately-on-kernel-6-17-2-2-pve-pwr2262-cpu0704-uefi0078.177201/post-821716
-
Oowenfiscus reacted to Impact's post in the thread How to add/setup/reconfigure HDDs for LVM-Thin storage with Like.
I'll try to answer the easier ones. 1. Go to node > Disks > LVM-Thin and create the thin pool on a disk you like. If it's unavailable wipe it first in node > Disks. That said I prefer ZFS over LVM-Thin (on proper hardware). I find it easier to...
-
Bblebo reacted to BobhWasatch's post in the thread AMD Ryzen AI Max+ 395 / Radeon 8060S Support with Like.
I got my FW desktop. PVE 9.0 runs fine on it. No issues so far. The GPU works with virtio-gl, which gives decent desktop performance for my usage. It replaces a Xeon D-1541 that was getting old. Relative to that it is very fast and has twice the...
-
ZZeeKay replied to the thread How to create Ubuntu 24 Base Template?.Looks like I downloaded the ARM64 cloud image instead of AMD64 ;) Reinstalled using Path 1 and seems to be working now.
-
WUpdate: I finally found the issue (i think) this is what i did, for those that may stumble across this thread. I went in and rechecked the esxi host and saw that a snapshot had been created, i think by our backup manager, proxmox does not like...
-
Aaneryan replied to the thread Ping spikes on virtual machine.Hi, not yet Currently I only use single processor, no issue I'll put the second processor later, and update here if I fix the issue
-
Ttuolei111 replied to the thread Proxmox VE VM Fails First SSH Attempt with "connect refused".The initial diagnosis points to an issue caused by WireGuard's MTU.
-
TTeleFragger replied to the thread PROXMOX 9 GPU PASS THROUGH.This was the easiest thing in the world to do! WOW
-
-
KKingneutron replied to the thread How to reserve space for one LVM thin volume when thin pool is full?.BTW, if you don't have backups - if your single 256GB SSD dies, you have NOTHING to restore. / srsly, start a gofundme or something if you don't have budget for backups
-
EEruanantion posted the thread How to Troubleshoot Regular Backup Failures? in Proxmox Backup: Installation and configuration.Hello everybody. I'm a new home-labber (been doing this less than a year) but I've quickly become obsessed. I have a 2-node PVE setup and I've hooked up a PBS as well. This has been going well for a while until I actually needed to restore one of...
