Latest activity
-
Mmolotch replied to the thread dnsmasq@zone1.service is not active.Nope, didn't disable dnsmasq. Should I try that command?
-
RRoCE-geek replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".This is what I've already suggested in my original post: Yesterday evening I made some waves to finally get some attention of the maintainers (I've tagged them at least few times in the manner: "maintainers may decide" - last attempt was in...
-
HHeracleos reacted to LKo's post in the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20 with
Like.
First test looks promising, though the rcv_wnd does fluctuate quite a bit as does the transfer speed, I haven't seen that before with 6.14 (might also be the case I didn't pay too much attention to it). I can say more in the morning when the... -
Ffrapel25 replied to the thread Esxi migration starts fast then becomes really slow..Hello, I've put the ssd into another server without raid controller, so just connected to the sata port, and everything worked correctly. The import took 15 minutes instead of hours. I think there's something wrong with the dell server or at...
-
TSince this thread comes up under some common proxmox networking searches, and most of us reporting problems are running Intel NIC's, I'll cross link to this thread...
-
shanreich replied to the thread SDN broken after using pve-network-interface-pinning tool.As a workaround, the issue should be fixed if you use a vlan-aware bridge as the underlying bridge of the VLAN zone and reapply the SDN config - since there we do not rely on generating a config with the physical port. -
SSteveITS reacted to shanreich's post in the thread SDN broken after using pve-network-interface-pinning tool with Like.
The issue is that this patch here [1] would need to be backported - but I noticed that the patch itself still need some adjustments so it works for all pinned names. I'll try to get a fix ready until tomorrow! [1]...
-
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.Cool, thanks for the review. Sounds related to my "side note" above about the docs saying to only use "en or eth." :) I would prefer to go forwards with pinning before updating to 9.x.
-
IIsThisThingOn reacted to UdoB's post in the thread PBS on desktop pc with SSD or in VM on PVE or not at all? with Like.
You have four (or is it five?) technically different devices which leads to a lot of possible combinations regarding a PVE cluster and a PBS. I can not give you one single way to go. But I have some hint from my point of view: The problematic...
-
SSteveITS replied to the thread HA migration time.FWIW if you are not using maintenance mode you may want to read https://forum.proxmox.com/threads/if-reboot-is-triggered-pve-node-goes-away-too-fast-before-ha-migration-is-finished.170268/.
-
Jjpbiker replied to the thread Speichermangel, keine CT mehr anzulegen obwohl genügend Platz ist.Hi... ich hatte die Platte noch nicht vollgeschrieben, allerdings mit einigen Themen experimentiert. Hier die Ausgaben: systemctl restart pvestatd pvesm status Name Type Status Total (KiB) Used (KiB) Available (KiB)...
-
mkoeppl replied to the thread Updates keep launching the normal PVE UI..Hi! Yes, at least for now, the Upgrade button will only send you to the web UI of the node. If you really want to run the upgrade itself from the PDM UI, you can access the node's shell from the PDM UI. -
shanreich replied to the thread SDN broken after using pve-network-interface-pinning tool.The issue is that this patch here [1] would need to be backported - but I noticed that the patch itself still need some adjustments so it works for all pinned names. I'll try to get a fix ready until tomorrow! [1]...
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.First test looks promising, though the rcv_wnd does fluctuate quite a bit as does the transfer speed, I haven't seen that before with 6.14 (might also be the case I didn't pay too much attention to it). I can say more in the morning when the...
-
Aalexskysilk replied to the thread Multipath configuration to Pure storage array (VLANS).really? why is that? I havent tried this on pve9 but I dont see the network stack changing that dramatically...
-
ggoller replied to the thread Frr update to 10.4.1-1 broke external routing?.No, it's fine -- you can omit the .running-config! -
Mmpeters replied to the thread PDM - ? Live migration between two unclustered hosts w/ shared vms.Ok, but as I understand it... When you remove a storage entry in Proxmox, you are primarily removing the configuration that tells Proxmox how to connect to that storage. The actual virtual machine data (disks) will remain on the physical storage...
-
Rrayjt replied to the thread [SOLVED] PVE9.1 installation - ISCSI boot problem/kernel panic.I just hit a similar panic during my ISO install of 9.1 on an iSCSI LUN. Should this really be marked as solved since the solutions are workarounds?
-
AAllister replied to the thread Windows 11 guest doesn't shutdown but reboots.The only way I could solve this problem was to take the Win11 install ISO and use Rufus to make a bootable USB key with all of the secure boot stuff and UEFI stuff disabled. You also have to set the USB drive to MBR in Rufus and that will change...
-
Nns33 replied to the thread Frr update to 10.4.1-1 broke external routing?.Will do! Do you need the .running-config in /etc/pve/sdn? Sanitizing that would be a minor headache. I can certainly do so, just figured I ask before going through that if it isn't needed