Latest activity
-
bbgeek17 replied to the thread How to use ISCSI for LXC storage.The storage content required for Containers is "rootdir". Not all supported storage pool types support all content types. For example, raw iSCSI storage (Block) does not support Snippets or ISO. The built-in iSCSI type also does not support... -
Ppetwri replied to the thread [SOLVED] AMD GPU passthrough & reset hookscript that works through guest shutdowns.Just compiled the forked version, thanks for pointing this one out. Kernel module seems to be loaded, will test if this is actually working. Edit for quick update: without doing any troubleshooting at all, all I can say is that the vendor-reset...
-
Ppaulc reacted to narrateourale's post in the thread Installation Question - VM vs dedicated hardware? with
Like.
VM should be absolutely fine. -
Dddanh512 replied to the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive".We running Window Server 2016 and SQL Server 2017 have two times auto stop Service SQL, need to restart the DB, can you describe the error you are experiencing for me? Any one facing the issues same with us, we are using virtio driver 0.1.285...
-
Ss4nguine posted the thread How to use ISCSI for LXC storage in Proxmox VE: Installation and configuration.Hello, I'm a bit confused when it comes to storage options for LXC containers. I want to move all of my disks to Truenas and migrate all disks there. In VM I can easily use ISCSI as backend storage, no issues here. But documentation on LXC...
-
Nnarrateourale replied to the thread Installation Question - VM vs dedicated hardware?.VM should be absolutely fine.
-
Nnarrateourale replied to the thread Licensing Question.Small but important difference: the license of Proxmox products is primarily the AGPLv3. What you are buying are subscriptions. In order to get updates from the enterprise repository (best tested, recommended for production) you need to have a...
-
news replied to the thread neuer PC - neue Installation - ständige Abstürze.Mal pauschal, weil laufend das gleiche gemeldet wird, ja nutze keinen der Mini PC. Punkt. Schau bitte einfach nach einem "gebrauchten" AMD Ryzen 5 5600x oder AMD Ryzen 7 5700x System mit SATA III und 32 GByte DDR4 Ram und es wird problemlos... -
Jjt_telrite replied to the thread TrueNAS Storage Plugin.My TrueNAS is a matching HP G8 Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz with 384 Gib of RAM , 5 x RAIDZ2 | 5 wide ( not mirrored)| 838.36 GiB 10k SAS Spinners , I have 9216 configured on all of the storage NICS and the Cisco n9k. It looks like...
-
Dddanh512 reacted to cwt's post in the thread Bad experience on Window Server running SQL on PVE 9.1 with Like.
The numbers in the Proxmox Wiki (“~10% improvement”) are based on synthetic sequential benchmarks and do NOT reflect real workloads like Windows Server + SQL / MySQL. In real world Windows database VMs, switching from qcow2 → RAW and enabling...
-
Mmolotch posted the thread dnsmasq@zone1.service is not active in Proxmox VE: Installation and configuration.Hello, Proxmox 8.4.14 I'm trying out SDN so I created a zone with a subnet. When I attach a lxc to the vnet and try to start it, it fails with dnsmasq@zone1.service is not active followed by 'systemctl reload dnsmasq@zone1' failed: exit code 1...
-
Dddanh512 reacted to bbgeek17's post in the thread Bad experience on Window Server running SQL on PVE 9.1 with Like.
You could try to pass-through a direct LUN to the VM to get an idea about some baseline. Blockbridge: Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Dddanh512 reacted to spirit's post in the thread Bad experience on Window Server running SQL on PVE 9.1 with Like.
They are still optimisation not yet implemented in qcow2 on lvm share (mainly the cache size), it could impact the performance with disk > 300Gb. But it should impact so much the performance. do you have tried with raw format to compare...
-
bbgeek17 replied to the thread Multipath configuration to Pure storage array (VLANS).You have an L2/L3/L4 issue, not L7. If nothing else changes - it will not make a difference whether you use NFS or iSCSI. Were you also running a hypervisor and placing the VMs on this host at the same time? Blockbridge : Ultra low latency...
-
Aalexskysilk replied to the thread Multipath configuration to Pure storage array (VLANS).Sure. the problem isnt with the networking per se; its that you're shoving 3 vlans into two nics, 2 of which really want their own interface. this would be very simply solved if you just added another interface (or 2) for non iscsi traffic. That...
-
Jjan1975 replied to the thread neuer PC - neue Installation - ständige Abstürze.tja leider komme ich nicht weiter. Ein Bios Update habe ich versucht, aber mangels Angaben welches Mainboard verbaut ist (steht nix drauf und im Bios steht nur default) und mangels updatedateien fürs Bios verworfen. Ein AMI2.22.1284 von...
-
Hhexfox posted the thread Nvidia vGPU (VM) and Transcoding (LXC) parallel (simultaneously) operation in Proxmox VE: Installation and configuration.Hello, everyone! My Proxmox 9.1 uses an Nvidia Quadro P2200 card. I managed to set up transcoding in Jellyfin (LXC). It is work perfect ! I want to activate vGPU and connect virtual cards to some VMs. I know there is a great guide -...
-
Mmahdiumran replied to the thread Monitoring of PVE with Zabbix not working.Thanks alot, i have same issue and solved by this steps
-
Ccfgmgr replied to the thread Multipath configuration to Pure storage array (VLANS).Would using NFS be better, and or an option? We have an X20 showing up in a month or two and I'll be using NFS. As much I would love to run iSCSI/FC instead... the lack of something like VMFS seems to make those a bit more problematic than I...
-
Mmicneu replied to the thread Wie auf Dateien zugreifen?.Was ist das für ein LXC, bei dem du nicht auf die Daten zugreifen kannst? Ich würde mir kurz anschauen, wie aufwendig es ist, an die Daten heranzukommen. Ich habe testweise einen Debian‑12‑LXC erstellt, und dort kannst du ja über die Konsole...
-
