We're looking at it from opposite perspectives. the word "prefer" tells the story; to facilitate high load, you will need to do this.
The key remains that backup systems are essentially passive- all the work have to occur from the sender end; If...
My reconfiguration, 3 HP G8 384Gib Ram , 2 x 10GBE storage nics configured for MPIO and a 4th HP G8 with 2 x 10 Gbe in MPIO mode Truenas CE v25 with 25 900GB sata disks (5wide \ 5vdev) usable Capacity: 11.94 TiB
all running on the ALPHA branch...
I tried the stop mode but I get the same error. So I guess I need to move my tmpdir because local only has 120Gb capacity. The Main2TB drive has about a terabyte of free space perhaps I could move it there. Being new to Linux I am not sure...
Hi,
You don’t need to configure RSTP on your Juniper switch for that trunk port. The reason is that the vmbr1 bridge in Proxmox behaves like a simple switch internally, so it doesn’t participate in spanning tree.
What you really need to do is...
Storage config:
- controller : virtio-scsi single
- Pilotes VirtIO
- cache=none or Write Through
- iothread=1
- discard=on
- ssd=1
vCPU config:
- type=host for Linux / x86-64-v2-AES for Windows
- numa=1 : if you have dual socket (2 physical...
Hello everyone!
We are using a Proxmox cluster with Ceph.
With the default settings, after a node is powered off, HA moves the VM to a healthy node within one minute, but the VM only starts after six minutes.
Is it possible to reduce this delay?
I have read through some of these threads, but correct me if I am wrong. If I have a mixture of Enterprise licenses and Community supported systems, I need to have an 80% mixture in favor of Enterprise to qualify for an Enterprise license for...
I have been trying to figure this out since OCT
I searched and the DNS is fine
root@ARMS:~# ping download.proxmox.com
PING download.proxmox.com (2607:5300:400:7d00::80) 56 data bytes
64 bytes from na.cdn.proxmox.com (2607:5300:400:7d00::80)...
I read through the documentation. I may have overlooked this detail, but is it supported or reasonable to install Datacenter Manager as a VM on an existing Proxmox stack or do I need to dedicate a piece of hardware for it?
PBS doesn't need much resources (see https://pbs.proxmox.com/docs/installation.html#recommended-server-system-requirements ) so you can easily use a used mini-pc. You can get them for around 100-200 € here. I would recommend to get one with a...
Still having this problem the HOST is able to ping the URL
root@ARMS:~# ping download.proxmox.com
PING download.proxmox.com (2607:5300:400:7d00::80) 56 data bytes
64 bytes from na.cdn.proxmox.com (2607:5300:400:7d00::80): icmp_seq=1 ttl=53...
Thank you very much!!! Hopefully the Proxmox team will notice and correct this as soon as possible.
However, for now I have been advising all partners to uncheck this option, at least for the time being, in potential installations to avoid problems.
I'm pleased to report that lxc-pve 6.0.0-2 appeared in the PVE 8 pve-no-subscription repository today and that after upgrading lxc-pve from 6.0.0-1 to 6.0.0-2 docker 29 runs without issue in my LXC containers.
Thanks for porting this patch to...