Latest activity
-
Mmandoss replied to the thread Proxmox sasl auth failed.https://forum.proxmox.com/threads/relay-username-and-password.129586/ I looked up this thread then removed line "smtp_use_tls = yes" and it's all works fine.
-
Jjakob_ledermann posted the thread [SOLVED] Automatic Hot/Cold Storage for VMs in Proxmox VE: Installation and configuration.Our VMs are only used for a few days at a time and then they won't be in use for quite a while. When they are in use the VMs require fast Storage to be usable, so I tried to use the hookscripts `pre-start` and `post-stop` event to move the disk...
-
JJack_Rookie posted the thread [SOLVED] Knoten hat keinen Zugriff nach außen - Container schon in Proxmox VE: Networking and Firewall.Hallo, ich habe ein Problem, dass ich mir nicht erklären kann. Ich habe vor kurzen den Schritt hin zu Proxmox gewagt und bin im Grunde auch sehr zufrieden. Nun stehe ich aber vor einem Problem, dass ich nicht gelöst bekomme. ich möchte einen...
-
-
Mmeyergru replied to the thread [SOLVED] PBS 4 having problems with API tokens?.As I said, most current. Homepage is on Docker with watchtower updating it always to the latest available, PVE is updated almost daily. You can see from your error message that there is an authentication error which leads to a JSON parse...
-
Ppetwri replied to the thread [SOLVED] AMD GPU passthrough & reset hookscript that works through guest shutdowns.@jaminmc what kernel / pve are you using? The repo you mentioned fails to compile on most kernel 6.17.2. Is this method of running the vendor reset module the "official" one?
-
SShaMAD replied to the thread PCIE Google Coral Install Instructions.curl -o install_coral_tpu.sh https://github.com/Bodengriller/frigate_debian_scripts/raw/refs/heads/Proxmox-Edition/install_coral_tpu.sh chmod +x install_coral_tpu.sh ./install_coral_tpu.sh --status
-
Bbicker replied to the thread PCIE Google Coral Install Instructions.Hello i have problme with Proxmox 9.1.1 root@pve0:~# lspci -v | grep -A 10 -i coral 02:00.0 System peripheral: Global Unichip Corp. Coral Edge TPU (prog-if ff) Subsystem: Global Unichip Corp. Coral Edge TPU Flags: fast devsel...
-
Ppetwri replied to the thread [SOLVED] PBS 4 having problems with API tokens?.Mind sharing your PVE and Homepage versions? I am also on the most current releases, but I am getting said error.
-
Ddung.pm replied to the thread Bad experience on Window Server running SQL on PVE 9.1.we are using FC SAN Dell PowerStore All NVME, RAID 6. By far we have try many things in config hardware but the laggy still the same. I see in this docs https://pve.proxmox.com/wiki/Performance_Tweaks that we need to use raw, and "write-back"...
-
-
Ffzoc reacted to 7thSon's post in the thread [SOLVED]Ceph dashboard cause ceph manager fail to start with
Like.
I just ran into the same prollem. After doing a systemctl reset-failed ceph-mgr@%YOUR-NODE-NAME-HERE%.service i was able to start the managers again I'm on Ceph pacific 16.2.9 & Proxmox 7.3-3 -
TTuba replied to the thread VMware migration zu Proxmox Windows.Leider Habe ich damit keinen Erfolg. Wenn ich die VM frisch importiere. Wird sofort die Reperatur gestartet, dann taucht kurz "Checkings disks for errors" auf und springt dann in den Recovery Modus. Sobald ich die VM neustarte geht es nur noch in...
-
-
Ffertig replied to the thread New Proxmox box w/ ZFS - R730xd w/ PERC H730 Mini in “HBA Mode” - BIG NO NO?.Hi, here we go, this is the state after reboot, after the zfs pool has gone
-
MMy main.cf.in file configurations for external relay It works while sending email no problem. But if iuse this configuration incoming mails does not reach my internal zimbra mail server. Sharing error for incoming mails; How can i use sasl...
-
-
Ddavid_tao replied to the thread Multipath configuration to Pure storage array (VLANS).@elnino54, how your Proxmox VE pass iscsi traffic from VLAN10/20/30 to VLAN100/101? via router? in my memory that is not a good idea? You should setup VLAN with IP Address for VLAN100 and VLAN101 on your Proxmox VE host. you may setup following...
-
BWell you could also think that it's bargain for enterprise environments that it's enough to have a support subscription for all your PBS and PVE nodes to have PDM without the nag and access to the enterprise repo instead of having to pay for PDM...
-
OPBS doesn't need much resources (see https://pbs.proxmox.com/docs/installation.html#recommended-server-system-requirements ) so you can easily use a used mini-pc. You can get them for around 100-200 € here. I would recommend to get one with a...
-
Aavlach replied to the thread Server keeps crashing.Forgive me I forgot to mention that I requested a full hardware check from Hetzner and everything was OK. dmesg -T outputs these errors: [Mon Dec 8 12:13:57 2025] No Local Variables are initialized for Method [_PLD] [Mon Dec 8 12:13:57 2025]...
-
VHave you any information on dmesg or journalctl?, it will be a hardware failure, due to ram (memtest is your friend) or even power supply failure not serving the necessary voltage/current to the equipment.
-
MMoin, wir haben vorher VM Ware genutzt und sind jetzt auf Proxmox umgestiegen. Dadurch das wir eine Windows Server Datacenter Lizenz haben muss nun ja unter Proxmox für die Lizenzsierung ein KMS Host aufgesetzt werden damit ich die VM`s...
-
EEduardo Taboada replied to the thread Server keeps crashing.Have you any information on dmesg or journalctl?, it will be a hardware failure, due to ram (memtest is your friend) or even power supply failure not serving the necessary voltage/current to the equipment.
