Latest activity

What's new Featured content New posts New profile posts Latest activity
  • S
    Sakamoto posted the thread Proxmox SDN Configuration in Proxmox VE: Installation and configuration.
    Hi All, I would like to ask whether an SDN Simple Zone and a VLAN Zone are able to communicate with each other. Currently, I have created two machines: One is using a VNet under the Simple Zone (using DHCP) The other is using a VNet under...
  • M
    mconsoir replied to the thread No access on clients after changeing ssl certificates.
    Hi, I'm having the same problem. I had to reinstall the whole instance. We use certificates from harica.gr.
  • G
    Gysmayo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.
    FYI maybe not so important but we are still running PVE 8.4.1 with kernel Linux pm01 6.8.12-9-pve and are also having those issues with fully patched PBS
  • G
    gfngfn256 replied to the thread LVMextend vm results in kernal panic.
    Assuming you have (already) used all the correct commands - I suspect the issue is being caused by running the commands with the disk/partition/LVM online coupled with the fact that it appears that the LVM is already full, as shown here: To...
  • J
    Johannes S reacted to UdoB's post in the thread Question on PBS setup and hardware with Like Like.
    You are questioning my words that PBS "wants IOPS"? That's... surprising! "Backup storage: Prefer fast storage that delivers high IOPS for random IO workloads; use only enterprise SSDs for best results." --...
  • J
    Johannes S reacted to Eduardo Taboada's post in the thread Move PBS backup to new 10G nic. with Like Like.
    You may setup another PBS instance in a remote location and made a sync Job between the two pbs. https://pbs.proxmox.com/docs/managing-remotes.html After this You can setup another pbs storage for the remote pbs
  • J
    Johannes S replied to the thread NAS UGreen DXP4800 Plus.
    Naja, das Argument mit den Ressourcen bezieht sich ja nicht so sehr auf den Stromverbrauch (wäre auch echt albern) sondern den RAM. Der einer VM zugewiesene RAM kann halt nicht anders genutzt werden, da sind lxcs tatsächlich flexibler. Nur bin...
  • J
    Johannes S reacted to IsThisThingOn's post in the thread NAS UGreen DXP4800 Plus with Like Like.
    Ist generell auch bei nicht so wichtigen Diensten eigentlich immer eine gute Sache. Hilft auch enorm beim troubleshooten. Der ganz grosse Vorteil von LXC ist die Nutzung von files anstelle von blockstorage. Das ist eine kompliziertes Thema und...
  • J
    Johannes S reacted to DeuSimon's post in the thread NAS UGreen DXP4800 Plus with Like Like.
    Das ist eine Community-App, nicht "offiziell" von TruNAS. Ist das gleiche als wenn Du Immich im LXC Container von Communityskripts installierst. Dazu fühlt sich niemand verantwortlich ausser denen, die das so anbieten. Immich empfiehlt VM...
  • cwt
    cwt replied to the thread [SOLVED] Kein Spamhaus/Validity trotz Unbound.
    Es gibt bei Spamhaus mehrere Stolpersteine: - sowohl für die IPv4 als auch IPv6 des Hosts müssen rDNS Einträge vorhanden sein (was grundsätzlich bei Mailservern/Gateways der Fall sein sollte) - IPv6-Bereiche von Hetzner landen häufiger auf der...
  • S
    SBauhaus replied to the thread [SOLVED] Kein Spamhaus/Validity trotz Unbound.
    Ah ok, dann habe ich den Ansatz jetzt verstanden. Ja, die Ausgabe zeigt die öffentliche IP vom PMG an. Es handelt sich um einen Cloudserver bei Hetzner, kann es vielleicht sein, dass Spamhaus die gesamte Hetzner-IP-Range als Open Resolver listet?
  • N
    Nemesiz replied to the thread Ceph freeze when a node reboots on Proxmox cluster.
    5 MON - A.I suggest to use this number only on really huge setup. 1 MON - on single ceph machine. 2 MON - no quorum 3 MON - regular setup 4 MON - no quorum? Try to lower MON setup to 3.
  • X
    xybo replied to the thread RSTP on Switch with Proxmox.
    yes, this how i did it as well but what about spanning-tree? Have you enabled it on that port "set protocols rstp interface ge-0/0/21.0 edge"? I'm not sure how to do this.
  • A
    Arity replied to the thread Can't connect to Proxmox GUI.
    I am using my Desktop PC. IPv4: 192.168.1.4
  • fba
    fba replied to the thread Can't connect to Proxmox GUI.
    yes, the correct link to the web-interface is https://192.168.1.18:8006 How are you connecting to the server? What is the ip of the device you're connecting from?
  • cwt
    cwt replied to the thread [SOLVED] Kein Spamhaus/Validity trotz Unbound.
    dig +short myip.opendns.com @resolver1.opendns.com musst Du in einer Zeile so absetzen, ohne Veränderung. Alternativ geht bspw. auch: curl ident.me curl api.ipify.org Die Ausgabe sollte = der public IP Deines PMG sein.
  • C
    canoziia replied to the thread Is Qualcomm's Wi-Fi 7 NIC Really This Bad? Passthrough Fails on Proxmox VE (PVE).
    The same problem. Gemini told me that was an problem with MSI vectors number. But I don't know how to solve it.
  • A
    Arity replied to the thread Can't connect to Proxmox GUI.
    Is it https://192.168.1.18/24 and not https://192.168.1.18:8006? Also, I just tried both; /24 returns "refused to connect" and :8006 returns the error "took too long to respond" The server itself is pinging google now though so thank you for...
  • N
    ness1602 replied to the thread RSTP on Switch with Proxmox.
    here is how i do it in ex2200: ge-0/0/21 { description SP1-data; unit 0 { family ethernet-switching { interface-mode trunk; vlan { members [ Server-Vlan...
  • fba
    fba replied to the thread Can't connect to Proxmox GUI.
    That's looking good. Assuming the ip address configuration is correct, the server should be available again at 192.168.1.18/24
Show older items
Top Bottom
Back