Latest activity
-
JJohannes S reacted to Kingneutron's post in the thread How to Reduce SSD Wearout in Proxmox? with
Like.
^ This. You can even get a 5-bay SAS / SATA enclosure that uses a standard PC power supply for under $100 on ebay. 5 Bay Hard Disk Enclosure Hot Swap Cage for 2.5/3.5 In SATA/SAS D Drive Bay 6Gbp . Might need tray adapters tho, you can get those... -
JIf your system has PCIe slots and SAS cards are readily available at low prices, SAS SSDs can be purchased relatively cheaply on the used market since they are not intended for general consumers. I recommend them. *DWPD also significantly...
-
JJohannes S reacted to news's post in the thread Identical ZFS checksum errors every few weeks with Like.
please change all sata 3 hdd cable and use some sata 3 cable with rate 6.00 GBit/s and a secure clip. don't route the cable with share, only setup the route loos fit.
-
JHallo, aus meiner Sicht ist das ein Designfehler für dein Datenmanagement. Wenn auf reine Daten aus unterschiedlichen Quellen zugegriffen werden muss, dann lege alles Zentral auf einen File-Server, NAS. Das kann als Software TrueNas Core auf...
-
JMan kann natürlich SFTP oder SCP verwenden. Aber eine dauerhafte (Datei-) Verbindung zu einem VM-Server auf Proxmox empfehlen sich natürlich die üblichen Verdächtigen SMB/CIFS bzw. NFS. Du richtest eine VM auf Proxmox ein und erstellst dort eine...
-
JIn general qemu can emulate arm devices but you will have to use the cli, it's not exposed in the web ui. You can obviously not completely emulate rpi's (gpio ...) but it may work for your testing / compiling use case...
-
JYou know, there is a thing called a "cross compiler" where you compile on a PC for a foreign target. This is very popular in the embedded space because most embedded chips are slow and have limited resources compared with a PC. If you do that...
-
JJohannes S reacted to Browbeat's post in the thread Update auf pve9 fehlgeschlagen - pve neu aufgesetzt - wie jetzt weiter? with Like.
Wozu eigentlich pi-hole, wenn du OPNsense nutzt, da kannst du AdGuard Home via Plugin nutzen... Für die Zukunft einfach die Backup-Funktion von OPNsense regelmäßig(er) nutzen;)
-
JJohannes S reacted to Falk R.'s post in the thread Update auf pve9 fehlgeschlagen - pve neu aufgesetzt - wie jetzt weiter? with Like.
Klar kannst du das, musst nur neue VMs anlegen, am einfachsten mit der gleichen ID. Danach einmal qm disk rescan ausführen und dann tauchen die Disks bei den neu angelegten VMs als unused auf.
-
JJohannes S reacted to Falk R.'s post in the thread Update auf pve9 fehlgeschlagen - pve neu aufgesetzt - wie jetzt weiter? with Like.
Lege einfach eine VM an, die Einstellungen können natürlich abweichen, außer BIOS/EFI Boot. Wenn du den Thin Pool über Datacenter Storage wieder eingebunden hast, siehst du im Datastore die Disks. Wenn die VM existiert, qm disk rescan ausführen...
-
JBy whom and for what purpose? its actively developed, if that's what you mean, but Proxmox has no tooling or integrated support. I've ran RGW in the past on Proxmox and the experience has been... mixed. tooling is a problem and there are...
-
JIf Minio was mature for you, keep using it. Openmaxio IS Minio.
-
JJohannes S reacted to nick.kopas's post in the thread [SOLVED] Upgrading from 8 to 9 with pinned kernel? with Like.
Unpinned my kernel and successfully completed an in-place upgrade. So far it seems everything works!
-
JJohannes S reacted to guruevi's post in the thread Proxmox x Hyper-V storage performance. with Like.
You are not comparing apples to apples though. HyperV does RAID1 how exactly? Software RAID, Intel VROC, Hardware RAID, at a higher data distribution layer? Windows is closer to what expected benchmark? Because a proper benchmark has a range of...
-
Jcache=none leaves the cache of the storage system enabled, use directsync instead. See here for comparision of caching modes https://pve.proxmox.com/wiki/Performance_Tweaks#Disk_Cache
-
JJohannes S reacted to alexskysilk's post in the thread Proxmox x Hyper-V storage performance. with Like.
caching. But if you already have a pretty good idea what the drives will be doing, what difference does this make anyway?
-
JJohannes S replied to the thread Best practice: How many apps per LXC/VM?.This heavily depends on your applications, usecases and used Hardware. For example running docker inside lxcs us known to break from time to time ( e.g. after updates) so any docker application should be run in a vm. But if you have limited RAM...
-
KKingneutron replied to the thread Proxmox not detected as bootable by OS-prober.If booting efi, ' apt install refind ' EDIT: use ' efibootmgr ' to correct boot order if needed
-
KKingneutron reacted to UdoB's post in the thread Proxmox not detected as bootable by OS-prober with Like.
Probably: yes! But please: PVE is meant to be the basis of a multitude of VMs. Put it on a stable hardware and avoid each and every "ideas" possible on this lowest level. Please! This means PVE "owns" the hardware! No dual-boot whatever OS you...
-
Ffjleon replied to the thread massive packet loss on network interface.it was definitely a firmware and not a kernel issue, since i could repro on any kernel (and distro) before getting the 2023 firmware from the manufacturer. it's been running fine since the update