Latest activity

What's new Featured content New posts New profile posts Latest activity
  • H
    heavenlyknightzz replied to the thread Proxmox Datacenter Manager 1.0 (stable).
    Is there any possibility to change the Validation for the DNS plugin to over 48seconds? I am currently still using an older DNS Server and i have a validation delay of 15mins on my other servers (PVE and PBS) and it works fine there. But i cannot...
  • U
    uzumo reacted to UdoB's post in the thread [TUTORIAL] Adding encrypted ZFS pool to Proxmox for VM storage + auto-unlock on boot with Like Like.
    That's of course the problem here. When I steal that computer I get the key for free. What attacking vector is it you are securing with this approach? The only situation I see is if the devices die so hard, that the build-in "erase"-function...
  • Y
    YungErrorHunter replied to the thread [TUTORIAL] Adding encrypted ZFS pool to Proxmox for VM storage + auto-unlock on boot.
    A quick note on when you want multiple encrypted ZFS pools in addition to having a ZFS system pool: Turns out when you have more than one and try to create a second systemd unit for them you will cause a systemd dependency cycle, and things will...
  • S
    SteveITS posted the thread SDN broken after using pve-network-interface-pinning tool in Proxmox VE: Networking and Firewall.
    After successfully using the PBS version of the NIC pinning tool on a couple servers, I tried a PVE 8.4.x server tonight. It seemed fine for most everything except SDN was broken afterwards, showing an error state on the zone (ZoneVLAN). I...
  • C
    chrsgrhmgrhm posted the thread [SOLVED] PVE backups to PBS running SUPER SLOW! in Proxmox VE: Installation and configuration.
    Hello all! I have an old Dell r610 that is running PVE 8.4, and a new (to me) Dell r740 running PVE 9. I backed everything up on the r610 to my PBS, then restored to the r740. So far, everything is going smoothly, yay! That is, until I...
  • K
    Kingneutron replied to the thread How to Reduce SSD Wearout in Proxmox?.
    ^ This. You can even get a 5-bay SAS / SATA enclosure that uses a standard PC power supply for under $100 on ebay. 5 Bay Hard Disk Enclosure Hot Swap Cage for 2.5/3.5 In SATA/SAS D Drive Bay 6Gbp . Might need tray adapters tho, you can get those...
  • K
    Kingneutron reacted to uzumo's post in the thread How to Reduce SSD Wearout in Proxmox? with Like Like.
    If your system has PCIe slots and SAS cards are readily available at low prices, SAS SSDs can be purchased relatively cheaply on the used market since they are not intended for general consumers. I recommend them. *DWPD also significantly...
  • U
    uzumo replied to the thread How to Reduce SSD Wearout in Proxmox?.
    If your system has PCIe slots and SAS cards are readily available at low prices, SAS SSDs can be purchased relatively cheaply on the used market since they are not intended for general consumers. I recommend them. *DWPD also significantly...
  • U
    uzumo replied to the thread Temperature.
    People who use servers want something simple and robust. Adding features compromises that. *I prefer Hyper-V Server over Hyper-V on Windows Server (Server Core). But management became too cumbersome, so I switched to VMware and then Proxmox...
  • I
    ismikes replied to the thread On system boot chrony.service is enabled but does not autostart.
    Results below. Every time you see chrony being started in the log it was done manually. The stops you see happened when a reboot was ordered. root@beelink:~# systemctl status chrony ● chrony.service - chrony, an NTP client/server Loaded...
  • I
    InfraGuy replied to the thread Virtual Redfish BMC Support on VMs.
    This is awesome! Created an account just to show my appreciation! Sounds like a few of us are labbing or learning Openshift/Openstack with this - can’t wait to set this up and have a go at it.
  • I
    InfraGuy reacted to v1k0d3n's post in the thread Virtual Redfish BMC Support on VMs with Like Like.
    Alright, well I ended up creating a whole project around this request, starting from the nice work that Jorge did. It just needed a bit more work and features for my use case (which is deploying OpenShfit/OpenStack for development and using the...
  • P
    patch replied to the thread Temperature.
    Me to Fair point against putting detailed information the node summary page. Indeed putting details about all sensor temperatures on a Node "Hardware" tab would make more appropriate and consistent with VM tab structure. Continuous...
  • Z
    zimbres reacted to RudiOnTheAir's post in the thread Upgrading from Proxmox 8 to 9 issue: GRUB error: out of memory with Like Like.
    OK, solution or workaround for (some) DELL server: https://bugzilla.proxmox.com/show_bug.cgi?id=6733#c37
  • D
    delorean_dude posted the thread Container issue in Proxmox VE: Installation and configuration.
    Hi all, New to Proxmox (about a month). After an update my Docmost container (from the helper script) has stopped allowing insert of images. I just get a box appear with no details (empty). I have checked the folder permissions (root:root). Ive...
  • J
    jfpayeur replied to the thread [SOLVED] Delete ZFS from UI.
    Thanks alot !!!! KeyWords so this post can be found more easily : how to delete a ZFS that is physically not there anymore proxmox I replaced a physical drive without removing the pool before
  • K
    Kingneutron reacted to uzumo's post in the thread threadripper 2000 series proxmox stuck on loading ramdisk with Like Like.
    There are several threads that have attempted various approaches to solve similar problems. It might be worth trying them out. https://forum.proxmox.com/threads/loading-initial-ramdisk-freeze.170163/post-794297
  • D
    djmontana replied to the thread What is the reason for USB Network Interface going offline?.
    Was there ever a resolution to this? My UGREEN USB adapters came up immediately when I first plugged them in but after making vmbr0 vlan-aware and making a sub-interface to vmbr0 I haven't been able to bring the adapter back up.
  • S
    snakeoilos replied to the thread [SOLVED] PBS 4 having problems with API tokens?.
    I'm assuming it's Homepage the dashboard thingy? Make sure: 1. Your API key is correct 2. Make sure the API token has the required permissions. Try give `audit` to `/`, and propagate. 3. Double check your config. My Realm currently has `pbs` and...
  • U
    uzumo replied to the thread threadripper 2000 series proxmox stuck on loading ramdisk.
    There are several threads that have attempted various approaches to solve similar problems. It might be worth trying them out. https://forum.proxmox.com/threads/loading-initial-ramdisk-freeze.170163/post-794297
Show older items
Top Bottom
Back