Latest activity
-
Hannes Laimer replied to the thread Question around Datacenter Manager.Hey, no. Not really, it is really lightweight. I'd recommend a simple debian CT and installing[1] it like a normal debian package, or a VM and use the provided ISO. Note that it doesn't have to run on PVE, it communicates to PVE/PBS only... -
Hi @naxiu , There are no wide-spread reports in the forum of web UI instability . There are occasional reports, such as yours, and in 99.9% of cases they are caused/resolved by: a) reconfiguring the smart-home routers , ie changing the DHCP... -
JFür den beschriebenen use case würde ich falls Lust auf ZFS da ist TrueNAS SCALE oder ansonsten openmediavault verwenden. UGOS und Synology traue ich nicht, deren Software scheint doch schon sehr Gebastel zu sein.
-
Ggrmg2010 posted the thread No access on clients after changeing ssl certificates in Datacenter Manager: Installation and configuration.Hi, i had added a Proxmox host and one Proxmox Backup Host to the PDM a few months ago. Yesterday i replaced the ssl certificates on the two hosts and PDM. Now i am not able to access the two clients anymore. I removed both clients and wanted...
-
Ttrollbot replied to the thread Fileserver recommendations.Thanks again for sharing your knowledge. Meanwhile I actually came up with another idea for a lightweight fileserver that I am probably going to follow up on first: Alpine-LXC with RClone and a USB disk for storage. (Might open another thread to...
-
Aaaxvig replied to the thread Stuck On Loading Initial Ramdisk.The cause of this issue for me was memory troubles. I found ECC errors in the IPMI health log. And running memtest from Advanced Options was locking up at a certain point. I resolved the memory errors and all was good.
-
Uubu replied to the thread PDM 1.0.1 Error "missing field `data` at line 1 column 157" on PBS Storage Access.Rebootet PBS, its fine now
-
Lliszca posted the thread Proxmox Mail Gateway - User Blocklist in Mail Gateway: Installation and configuration.I am uncertain how to use the Blocklist. I tried to block mails but I feel like I am doing it wrong: What is the pulldown menu for and whats the relation to the other position (below) where I can also put e-Mail addresses?
-
-
Pparanoidnemo replied to the thread RFC: easy & straightforward lxc unprivileged container uid/gid remap strategy.That was it, thanks,
-
IIch tu es nicht. Ein bash-Skript aus dem Internet als root ausführen, wenn man nicht weiß wie es funktioniert, ist NIE eine gute Idee. Wenn man dagegen weiß, wie es funktioniert, braucht man es höchstwahrscheinlich nicht :) Dazu kommt, dass die...
-
Bbunk3m reacted to bbgeek17's post in the thread [SOLVED] Help request - PVE8.4 - Networking appears to have died with
Like.
I'd say this is not surprising at all. Very often when network-dependent services start without network being available they are not able to properly engage. A restart is a prudent step. Blockbridge : Ultra low latency all-NVME shared storage... -
Maximiliano replied to the thread [SOLVED] Error when adding notification target.Hello. Please take a look at the config file /etc/notifications.cfg, according to the error, the value at line 8 for the `mailto` key is only 2 characters long (which is not a valid email). Please take a look at our notification documentation [1]... -
Jjlauro replied to the thread Group filter.https://bugzilla.proxmox.com/show_bug.cgi?id=3586 seemed to be the closest, so I added a comment and linked back. VM names change, but we do have a naming convention for our servers and the names do show in the comments for the job. A regex...
-
JJohannes S replied to the thread Fileserver recommendations.lxc is a great base os for container images if you can live with a less comfortable environment (e.g. by default it doesnt have a bash but the busybox shell) and some things work different than in main stream linuxes (e.g. by default systemd is...
-
Ccurruscanis replied to the thread TrueNAS Storage Plugin.What is the problem your having? Can you independently ping each interface ip from proxmox to truenas to prove your VLAN / network configuration is correct?
-
Ffmaurer reacted to SteveITS's post in the thread [SOLVED] network interface name too long with Like.
FWIW PVE and PBS have a similarly named utility to create the link files: https://pve.proxmox.com/wiki/Network_Configuration#:~:text=Overriding%20Network%20Device%20Names
-
SSteveITS replied to the thread [SOLVED] network interface name too long.FWIW PVE and PBS have a similarly named utility to create the link files: https://pve.proxmox.com/wiki/Network_Configuration#:~:text=Overriding%20Network%20Device%20Names
-
Ffmaurer replied to the thread SDN and VLAN Zone..For me, it helped to set vlan-aware on the vmbr0 of the proxmox host. This created a much simpler sdn config in /etc/network/interfaces.d/sdn See here for further information...
-
NVery unlikely. Proxmox developers do not work neither on this nor with criu developers, they responded that "criu does not work because X, Y and Z", and when I asked whether they want to discuss this with criu developers they did not respons...
-
Ffmaurer replied to the thread [SOLVED] network interface name too long.I had error: netlink: enp225s0f1np1.12: cannot create vlan enp225s0f1np1.12 12: interface name exceeds max length of 15 I did have the following in /etc/network/interfaces.d/sdn: auto ln_student iface ln_student link-type veth...
