Latest activity
-
Ffutiless replied to the thread [GPU Passthrough] Severe Artifacts/Crashes with cpu: host/EPYC- but Stable with cpu: kvm64 on Zen 5 9955HX*.https://forum.proxmox.com/threads/ms-a2-minisforum-amd-ryzen%E2%84%A2-9-9955hx-radeon%E2%84%A2-610m-%E2%80%93-the-%E2%80%9Ci-finally-stopped-crying%E2%80%9D-zero-artifact-igpu-passthrough-thread.177351/ I made a full wright up check it out :)...
-
Sebi-S replied to the thread Proxmox Datacenter Manager 1.0 (stable).What concerns me: What are the requirements for installing PDM? What is recommended for installations with up to 100 nodes (storage/RAM/vCores)? Edit: The datasheet says 2+ Cores, 2+ GB RAM, 8+ GB free Space. -
Ffutiless replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.Windows conf ##args for args -cpu kvm=off,hv_vendor_id=proxmox' ##OCT22args -cpu 'host,hv_passthrough,level=35,-hypervisor,+svm,' ##args -device virtio-iommu-pci,bus=pcie.0,addr=1e.0,ats=on,caching-mode=on, -cpu...
-
DDavid_ATN replied to the thread Proxmox Datacenter Manager 1.0 (stable).I would like to request a community subscription license option so small businesses can support the development.
-
JJohannes S replied to the thread NAS UGreen DXP4800 Plus.Kommt halt drauf an, ob man die ZFS features haben will oder nicht: https://forum.proxmox.com/threads/fabu-this-is-just-a-small-setup-with-limited-resources-and-only-a-few-disks-should-i-use-zfs-at-all.160037/ Das Writeup bezieht sich zwar auf...
-
EThe license as with most of our products is AGPL so you can use PDM by yourself free of cost as you see fit. If you want to have proper enterprise subscription support and access to the Proxmox Datacenter Manager enterprise repository, at least...
-
LLKo replied to the thread [SOLVED] Super slow, timeout, and VM stuck while backing up, after updated to PVE 9.1.1 and PBS 4.0.20.Ok, so my testing showed what we already know - with 6.14.11-4-pve, all backups went through smoothly tonight. I installed 6.17.4-1-pve and rebooted pbs, and the first manual backup I tried started stalling after approx. 4GiB transfer. This did...
-
FFranky779 replied to the thread Message "No valid subscriptions".But all servers should be 100%!? :) We don´t have a single node without a license. Strange 1 x Proxmox Backup Server Community Subscription 1 year 3 x Proxmox VE Standard Subscription 2 CPUs/year Probably the pmxb Community Edition is -25%
-
JJohannes S replied to the thread Docker containers fail to start on Proxmox 9 / Debian 13 host (worked fine on Proxmox 8).Are you running k3s directly on the Proxmox nodes or inside a vm? And are you running PVE as VM on kubevirt or bare metal? If your main driver is k3s I would suggest to install it bare metal instead of PVE or as a VM , neither K3S nor PVE are...
-
TtomR posted the thread running ServerView Agentless Service on Proxmox in Proxmox VE: Installation and configuration.Hello dear community, i try to run the Fujitsu ServerView Agents on a PRIMERGY RX2540M7 - Proxmox VE 9.1 to get some facts our of the OS for monitoring solutions and to use the benefits of controller monitoring tools this agentless services...
-
TtomR reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.1 available! with
Like.
Siehe https://forum.proxmox.com/threads/proxmox-virtual-environment-9-1-available.176255/ -
Bbinaryanomaly reacted to jsterr's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
Thanks, love the custom views possibilites!
-
Bbinaryanomaly reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.0 (stable) with Like.
We're very excited to present the first stable release of our new Proxmox Datacenter Manager! Proxmox Datacenter Manager is an open-source, centralized management solution to oversee and manage multiple, independent Proxmox-based environments...
-
Eelvito replied to the thread NAS UGreen DXP4800 Plus.Der ZFS Pool alleine ist es noch nicht, Truenas ist eher wie ein DSM von Synology auf Steroiden. Jedenfalls eine ausgezeichnete Wahl. Klar kannst du aus den 4 Platten in Proxmox auch direkt einen ZFS Pool erstellen, Samba/NFS installieren...
-
Ffdcastel replied to the thread Feature request: VM configuration toggle for 4k block device sector size.I’m embarrassed to admit that I just realized I’ve hijacked this thread. I’ve opened a new one here: https://forum.proxmox.com/threads/proxmox-x-hyper-v-storage-performance.177355/
-
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..At first glance, Proxmox appears to offer substantial improvements over the old setup, with a few important observations: 1) According to Samsung’s official specifications this model is rated for 6800 MB/s sequential read and 2700 MB/s...
-
Ffdcastel replied to the thread Proxmox x Hyper-V storage performance..For reference, the existing Hyper-V Server deployment (on identical hardware) yields the following results: C:\> fsutil fsinfo sectorInfo C: LogicalBytesPerSector : 512 PhysicalBytesPerSectorForAtomicity ...
-
-
Ffdcastel posted the thread Proxmox x Hyper-V storage performance. in Proxmox VE: Installation and configuration.I’m evaluating Proxmox for potential use in a professional environment to host Windows VMs. Current production setup runs on Microsoft Hyper-V Server. Results follow: 1) Using --scsi0 "$VM_STORAGE:$VM_DISKSIZE,discard=on,iothread=1,ssd=1"...
-
-
BBypper posted the thread Bug creating NFS volume storage in Proxmox VE: Installation and configuration.I want to create a NFS storage volume in Datacenter Storage section, and when I write related info, I get the following error: And looks that the new volume wasn't created, it does not appears in the list, but Host mount the NFS volume: ~# df...
-
-
AAndreas221988 replied to the thread Wiederkehrender Data Fabric Sync Flood Fehler.Danke wie finde ich das raus? :)
