Latest activity
-
Falk R. replied to the thread Update auf pve9 fehlgeschlagen - pve neu aufgesetzt - wie jetzt weiter?.Klar kannst du das, musst nur neue VMs anlegen, am einfachsten mit der gleichen ID. Danach einmal qm disk rescan ausführen und dann tauchen die Disks bei den neu angelegten VMs als unused auf. -
JJohannes S replied to the thread Update auf pve9 fehlgeschlagen - pve neu aufgesetzt - wie jetzt weiter?.Doch schon, aber du musst dir halt wieder die passende vm-Config erstellen, in den Images steht nichts darüber, wie RAM, CPUs, Netzwerk etc konfiguriert waren.
-
Theoretisch könnte das jemand reverse-engineeren oder ( analog zu btrfs was Ideen aus zfs als Inspiration genommen hat) nachbauen. Die Frage ist aber: Wozu? Aktuell werden ja selbst bereits existierende opensource-cluster-Dateisysteme wie ocfs2...
-
JThat appears to use a mod script from here. It in fact, mods the PVE GUI quite substantially. Be aware that this has the potential of breaking the PVE, especially on future updates/upgrades. Running any script from the WWW on a hypervisor host...
-
Ttrollbot posted the thread Fileserver recommendations in Proxmox VE: Installation and configuration.Hi all, sorry in case I am posting into the wrong part of the forum, am new around here and could not find a section on actual applications on the Proxmox server. If there is a better section for my kind of question, please let me know and...
-
NNewbAdmin replied to the thread [ISSUE] No UEFI boot after Proxmox 9 upgrade from legacy boot.Sure thing. Here it is: UUID=<your_EFI_partition_UUID_here> /boot/efi vfat defaults 0 1
-
AContributor T Skinner has been actively working on this, excited to hopefully see it in PVE9! https://lore.proxmox.com/pve-devel/20251025183814.698627-1-thomas@atskinner.net/T/#u
-
Zzacthedev replied to the thread Issues moving from NVIDIA RTX3080 GPU passthrough to AMD RX 9070 XT.Alright reinstalled and I did confirm the /sys/bus/pci/drivers/amdgpu/ path now exists. With your script though, I was seeing this error before the reinstall: sed: can't read /etc/kernel/cmdline: No such file or directory I went ahead and...
-
Nnashu2k replied to the thread Temperature.It is, yes That's why I'm using backups and what not While I agree with the approach of not condoning altering things manually, a UI change shouldn't "break" the hypervisor as a whole. I'll try to test some kind of fallback for the UI if the...
-
Aalexskysilk replied to the thread OCI Images in LXC (Release 9.1).I find the inclusion of OCI containers a lazy first attempt. More to the point, it offers very little beyond running docker in a container (which is fairly simple to do) but unlike that approach you dont have any granular control. Also, the need...
-
Gglcos reacted to gfngfn256's post in the thread Increased Power Consumption After Upgrading Proxmox from 8.4 to 9.1 with
Like.
I observed the opposite, a drop of about 2W, as in my upgrade post. It is probably very relative to the specific HW & work-load in question. -
Ggfngfn256 replied to the thread Temperature.That appears to use a mod script from here. It in fact, mods the PVE GUI quite substantially. Be aware that this has the potential of breaking the PVE, especially on future updates/upgrades. Running any script from the WWW on a hypervisor host...
-
JThe only configuration that I have done other than configure appropriate network information is install multipath, and nvme-cli.
-
Nnashu2k replied to the thread Temperature.Oh well, that's your opinion - just try to go outside your bubble and you'll see... the battle of OSes is quite real this answer was probably what I was expecting more than the "coffee" response... PS: found a good solution btw -...
-
Ggfngfn256 replied to the thread Increased Power Consumption After Upgrading Proxmox from 8.4 to 9.1.I observed the opposite, a drop of about 2W, as in my upgrade post. It is probably very relative to the specific HW & work-load in question.
-
Vvirtuallyk reacted to Eduardo Taboada's post in the thread Proxmox with private IP's and router. with Like.
There are some several escenarios for your approach: 1) You can use a firewall like Pfsense/Opnsense to connect it directly to your wan connection of any way (ppoE, DHCP, etc) for this you need to know what is the method for doing this. After...
-
Eelvito replied to the thread NAS UGreen DXP4800 Plus.Hallo, ich habe sowohl das DXP 4800plus und das 8800plus. UGOS habe ich nicht ein einziges mal gestartet und kann daher auch dazu nichts sagen. Vor den DXPs hatte ich 15 Jahre diverse Synologys und dorthin möchte ich nicht mehr zurück. Auf...
-
Gglcos posted the thread Increased Power Consumption After Upgrading Proxmox from 8.4 to 9.1 in Proxmox VE: Installation and configuration.Hi everyone, today I upgraded one of my Proxmox virtual hosts from version 8.4 to 9.1. The upgrade itself went smoothly and all VMs are running normally. However, I noticed a small but measurable increase in power consumption after the upgrade...
-
-
SScplayer replied to the thread [SOLVED] VM hat mehr speicher als dieser zugewiesen ist.Danke dir damit konnte ich jetzt die Festplatte erfolgreich vergrößern und hab mir das direkt notiert. Daher Problem gelöst.
-
Aariancabef replied to the thread [ISSUE] No UEFI boot after Proxmox 9 upgrade from legacy boot.thanks both for your expertice. Can you write down here the "Copied in the missing line in /etc/fstab from one of the known-good servers," for those who just have one server and not any other source for that line? Thanks in advanced.
