Latest activity
-
Bbluesite replied to the thread [SOLVED] Nach PBS update von 3 auf 4 fehlt der bootloader.gib mal lsblk ein in der Konsole damit man sieht welche SSD/HDD angeschlossen sind, vielleicht muss man ja nur grub neu installieren auf den Bootsektor
-
MagicFab reacted to Autrui's post in the thread Post-upgrade to Proxmox 9 : systemd-boot to remove ? with
Like.
root@proxmox:~# proxmox-boot-tool status Re-executing '/usr/sbin/proxmox-boot-tool' in new private mount namespace.. System currently booted with uefi 4479-F30E is configured with: uefi (versions: 6.17.2-1-pve, 6.8.12-17-pve) 447A-5643 is... -
MagicFab replied to the thread Retry Response: PVE2 API: Hostname/Username/Realm/Password/Port required for PVE2_API object constructor..Maybe ask the authors on Github ? See#6 at: https://github.com/The-Network-Crew/Proxmox-VE-for-WHMCS Fabián Rodríguez | Le Goût du Libre Inc. | Montreal, Canada | Mastodon Proxmox Silver Partner, server and desktop enterprise support in...
-
GWe're pleased to announce the release of Proxmox Backup Server 4.1. This version is based on Debian 13.2 (“Trixie”), uses Linux kernel 6.17.2-1 as the new stable default, and comes with ZFS 2.3.4 for reliable, enterprise-grade storage and...
-
fba replied to the thread Proxmox with Cisco Nexus LACP.Hi, your bond on Proxmox VE uses ovs_bonds ens1f0np0 ens1f1np1 but the interface configuration a few lines above state iface ens2f0np0 inet manual iface ens2f1np1 inet manual -
MagicFab replied to the thread Dell VEp1485-Proxmox installation.This indicates how to install RHEL, should be usable for Proxmox VE: https://www.manualslib.com/manual/3891307/Dell-Emc-Vep1485.html?page=18#manual Fabián Rodríguez | Le Goût du Libre Inc. | Montreal, Canada | Mastodon Proxmox Silver...
-
Ooreze replied to the thread Problem with iGPU on Gmktec G3.Unfortunately it didn't work, I've updated intel-microcode package before - no effect. I tried to use all of these flags one by one and no effect, there is still problem with gpu. One thing I noticed is there is no error if there's a display...
-
FHello, I trying to connect two switches in VPC mode with proxmox with LACP. I get port status : Ethernet1/5 is down (suspended(no LACP PDUs)) the same on the other switch Nexus-02# show running-config interface ethernet 1/5 !Command: show...
-
KKingneutron reacted to leesteken's post in the thread [SOLVED] Proxmox zfs pool replaced drive - missing BIOS boot and EFI partitions with Like.
Not really but you forgot some of the steps from the section Changing a failed bootable device: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#sysadmin_zfs_change_failed_dev
-
KKingneutron reacted to news's post in the thread [SOLVED] Proxmox zfs pool replaced drive - missing BIOS boot and EFI partitions with Like.
please read: man sgdisk sgdisk /dev/disk/by-id/<working-disk> -R /dev/disk/by-id/<new-disk> sgdisk -G <new-disk> # the you must create new boot disk. proxmox-boot-tool format /dev/disk/by-id/<new-disk>-part2 proxmox-boot-tool init...
-
KKingneutron reacted to fabian's post in the thread Bash Deadlock after SCSI rescan with 9.1 with Like.
could you try (installing and) booting the 6.14 kernel on the 9.1 machine?
-
KKingneutron reacted to bbgeek17's post in the thread Bash Deadlock after SCSI rescan with 9.1 with Like.
I’ve asked one of the developers to weigh in, and our assessment aligns with @fabian’s recommendation to try a different kernel. The symptoms point to a potential regression in the newer kernel, most likely within the vendor-provided driver for...
-
Ddnllmb replied to the thread Trouble with local LXC ports access (behind OPNsense VM) from home network machines..Hi Land_Strider, the gateway for an LXC is configured on the Proxmox web UI in the network settings of the LXC, right were you also configure its IP.
-
LLand_Strider replied to the thread Trouble with local LXC ports access (behind OPNsense VM) from home network machines..Hey, thanks for your interest. Here's my Jellyfin network.xml content: <?xml version="1.0" encoding="utf-8"?> <NetworkConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">...
-
Ddnllmb replied to the thread Proxmox & Opnsense VLAN Configuration.Hi whyme, you're welcome. :) If you want the traffic of the wifi SSIDs to be routed through the OPNsense, then your approach with bridges and VLANs sounds right. If your OPNsense doesn't have an IP in the 192.168.178.x segment, it wouldn't be...
-
bbgeek17 replied to the thread Bash Deadlock after SCSI rescan with 9.1.I’ve asked one of the developers to weigh in, and our assessment aligns with @fabian’s recommendation to try a different kernel. The symptoms point to a potential regression in the newer kernel, most likely within the vendor-provided driver for... -
Kkomacke replied to the thread no default gateway on OCI container with dhcp.Got it. While I did run the debian 13 template and confirmed it's connectivity and routes, I didn't check which dhcp client was running, so consider the reference to udhcpc to be a typo regarding the debian container. Here's the output from the...
-
bbgeek17 replied to the thread Migration & Backup issues with NFS Dell unity storage.You have shown in the screenshot a hexdump of the disk that is explicitly skipped by the backup per the other screenshot you are showing. So the zeroes read are from the different disk, is it possible that it is mostly sparse? Blockbridge ...
-
We're pleased to announce the release of Proxmox Backup Server 4.1. This version is based on Debian 13.2 (“Trixie”), uses Linux kernel 6.17.2-1 as the new stable default, and comes with ZFS 2.3.4 for reliable, enterprise-grade storage and... -
bbgeek17 replied to the thread Proxmox 9.1.1 FC Storage via LVM.CLVM championed by RedHat at one point, seems to have fallen out of favor, so taking on support for it might be quiet a tall task...