Latest activity
-
WWvdW replied to the thread Debian 13.1 LXC template fails to create/start (FIX).Thanks @Impact . I had a look at that thread. Unprivileged = 1 Nesting = 0 Firewall = 0 Doesn't work. Unprivileged = 1 Nesting = 1 Firewall = 0 Works. I prefer not using nesting for isolation. @ProxmoxStaff: Any idea why not nesting will cause...
-
Mmili posted the thread how to access vm files in a faile proxmox ve server in Proxmox VE: Installation and configuration.Hi. I have a hp server with 3 disk, disk1,2 and 3. proxmox pv 8.4.1 was installed on disk 1 all vms are on disk 2 and 3 now disk 1 is completely failed ... all vms are windows 10, and I have some important files on drive c: What should I do to...
-
Sskltw posted the thread Is proxmox affected by CVE-2025-11234 in Proxmox VE: Installation and configuration.Hello, I hope this is the right place to ask, and that someone can help me. Since Proxmox is based on KVM/QEMU, I’d like to know whether PVE 8 and PVE 9 are affected by CVE-2025-11234. Thank you very much, Steffen
-
l.leahu-vladucu reacted to t.lamprecht's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with
Like.
We recently uploaded the 6.17 kernel to our repositories. The current default kernel for the Proxmox VE 9 series is still 6.14, but 6.17 is now an option. We plan to use the 6.17 kernel as the new default for the Proxmox VE 9.1 release later in... -
CGood morning, Proxmox ver 8. Windows vm, although it recognizes the insertion of the ARUBA KEY USB stick for digital signature, the bit4id utility does not recognize the digital signature token. Is there a special way to configure the USB? I...
-
-
MMolch replied to the thread [SOLVED] Fehler beim Klick auf „Whitelist“ – internal error, unknown action 'whitelist' (PMG 9.0).ah - ja der Custom Spam Report hatte noch alte Links; Replacement durch <a href='[% item.href | url %]&action=welcomelist'>Welcomelist</a> War die Lösung.
-
Wwaltar replied to the thread Proxmox hangs after upgrade to v9.I would assume that if you set "start on boot off" for all vm+lxc, even stop all, then reboot just pve and there will not coming any errors on console after pve prompt. I think there is somethink with app_armor to one/more lxc/vm setting...
-
readyspace replied to the thread Error backing up ChromeFlex VM.Hi, without more details from you, this error often arises with unstable I/O or storage paths (e.g. USB, remote mounts) and sometimes resolves by switching backup mode or retrying. -
WI recorded the entire boot sequence and console updates a few minutes after. https://youtu.be/C9GJ2WJ-1x8
-
readyspace replied to the thread USB Lan Adapter.Hi, this is likely a Realtek driver issue — RTL8531B uses the r8152 module which can be unstable on Proxmox. Check with ethtool -i enx00e04c680835; if wrong or failing, install r8152-dkms (or r8168-dkms) and test direct IP (no bridge) to...
-
Wthanks, that did it.
-
Wor zpool import -f -d /dev/disk/by-id/ 2697102583354024049
-
Wwaltar reacted to ness1602's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with Like.
Tested on 3 machines, bcachefs also works :)
-
Wwaltar reacted to t.lamprecht's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with Like.
We recently uploaded the 6.17 kernel to our repositories. The current default kernel for the Proxmox VE 9 series is still 6.14, but 6.17 is now an option. We plan to use the 6.17 kernel as the new default for the Proxmox VE 9.1 release later in...
-
readyspace replied to the thread Proxmox VE - issue with 10Gigabit eht card with intelX520.Hi, -5 typically corresponds to -EIO (I/O error). That suggests the driver attempted to communicate with the device (e.g. via PCI config space, memory-mapped registers, etc.) but something failed at a low level (bus, hardware, MMIO access). In...
-
Vvmblaster replied to the thread NIC no longer works after kernel upgrade..@robertyboberty i just tried adding that param on my system. NIC still doesn't work. Still showing as link down. Damnit. Not seeing much in the logs about it # dmesg -T | grep -i atlantic [Tue Oct 14 07:13:48 2025] atlantic: Detect ATL2FW...
-
Stoiko Ivanov replied to the thread [SOLVED] Fehler beim Klick auf „Whitelist“ – internal error, unknown action 'whitelist' (PMG 9.0).Hm - ist potentiell ein Fehler beim hinzufügen der API-methods für backward-compatibility. Es wurden Black-/Whitelist durch Block-/Welcomelist ersetzt - siehe https://pmg.proxmox.com/wiki/Roadmap#Proxmox_Mail_Gateway_9.0 Ich nehme an, es wurde... -
Stoiko Ivanov replied to the thread PMG 9 Mobile Login for Quarentaine dosent work goes to pmg login.While the quarantine interface did change for mobile devices between PMG 8.2 and 9.0 - it should not change if you can login with the link in the quarantine report or not (I assume this is what you mean with token link in the e-mail) Please...
-
Mmicroage replied to the thread Changing the login template.What I mean is where the file with the source of the login window is located and whether it can be changed.
-
Kktoczyski replied to the thread Freeze on FreeBSD VM running in PVE 9.Hi, head /proc/pressure/* ==> /proc/pressure/cpu <== some avg10=0.00 avg60=0.00 avg300=0.00 total=1656264799 full avg10=0.00 avg60=0.00 avg300=0.00 total=0 ==> /proc/pressure/io <== some avg10=1.96 avg60=5.86 avg300=6.04 total=49770012009 full...
