Latest activity
-
Yyiyang5188 replied to the thread The VPUG virtual machine of A16 cannot be started..Execute the startup command alone and report an error.
-
-
dakralex replied to the thread Proxmox does not start after attempted update from 7 to 8 to 9.From the apt history it looks like there was an in-between upgrade to many packages from Proxmox VE 9: Start-Date: 2025-10-05 16:21:44 Commandline: apt upgrade Install: [...] proxmox-kernel-6.14:amd64 (6.14.11-3, automatic)... -
dakralex replied to the thread Proxmox 9 HA Issue: Node stuck in "old timestamp- dead" after apt dist-upgrade.Hi! I haven't tried to reproduce it yet: When was the update performed? Has the watchdog been inactive before already (some recent entries in journalctl -u watchdog-mux)?
-
Mmimpqrf4s replied to the thread Made mistake in corosync.conf; now cannot edit.Your code is great. I would just add the reference to the documentation that (almost) covers this case and this script from github which recommends using a `sleep 30` before restarting anything, which I found very useful.
-
WWhatever posted the thread Correct VM NUMA config on 2 sockets HOST in Proxmox VE: Installation and configuration.Good day Help me figure out and implement the correct virtual machine configuration for a dual-socket motherboard (PVE 8.4, 6.8.12 kernel) Given: root@pve-node-04840:~# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes...
-
TT.Grube posted the thread Proxmox 9 Veeam 12.3.2 Worker start failed in Proxmox VE: Installation and configuration.Hello! We have the problem that very often Veeam fails to start the worker. Now the problem could be with Veeam or with Proxmox. I then always have to manually abort the worker start in Proxmox. When I manually repeat the backup job, it usually...
-
Wwaltar reacted to Kingneutron's post in the thread One zfs pool slows down all other zfs pools with
Like.
> One of pools is running on simple consumer (dramless) nvme's (3 disk raidz1, one disk missing) Seriously, you're running a consumer-level 3-disk raidz DEGRADED with 1 disk MISSING, and posting about it here?? Fix your pool first. If you want... -
Wwaltar replied to the thread Recommendations for Dell R7715 Hardware selection / controller question.I mentioned a nvme config only as even a mix of 8 nvme and up to 16 sata/sas ports makes no sense anymore to me. If you want performance use a raid controller and if you want zfs for it's features don't select it.
-
Bblbecek replied to the thread Debian 13 lockup on reboot.So the "Standard VGA" solution seems to do the trick. I would prefer using virtviewer, but at least this is a pretty good workaround for text consoles. I also tried to use consoleblank=0 as VM kernel cmdline parameter and on the server with Xeon...
-
Gglaeken2 replied to the thread WARNING. Possible data lost after write and/or data corruption. MDRAID with writemostly. Kernel 6.14.11-2.Bug status: CONFIRMED, reproduced TURNING WRITEMOSTLY OFF, FOR MDRAID IS ADVISED ASAP HIGH DATA LOSS RISK Experiment type: system clone to VM Experiment start point: a running system in good condition after disabling writemostly Experiment...
-
-
KOh, I see. Yes, that is because you have the saferemove flag enabled on the storage: https://pve.proxmox.com/pve-docs/chapter-pvesm.html#pvesm_lvm_config The VM shuold already be functioning fine and not be blocked by that removal, just other VM...
-
KKingneutron replied to the thread One zfs pool slows down all other zfs pools.> One of pools is running on simple consumer (dramless) nvme's (3 disk raidz1, one disk missing) Seriously, you're running a consumer-level 3-disk raidz DEGRADED with 1 disk MISSING, and posting about it here?? Fix your pool first. If you want...
-
KKingneutron replied to the thread Backing up my PVE/PBS setup/configuration.https://github.com/kneutron/ansitest/tree/master/proxmox Look into the bkpcrit script, point it to external disk / NAS, run it nightly in cron
-
KKingneutron replied to the thread Double drive failure on zfs RAID 1. Any suggestions on how to debug?.Hope you have a backup. RAID is not
-
Ffredetech reacted to fba's post in the thread Proxmox claims /var/tmp has no space despite it does with Like.
Why do you thinkt the stalling upload is related to /var/tmp? This warning is totally common. Do you have any other messages indicating an issue with this folder? Try to copy the iso via CLI instead. Local storage uses /var/lib/vz/template/iso to...
-
WIt would probably be better to install Tailscale into a VM or LXC and access the PVE host via that guest.
-
RRares replied to the thread [SOLVED] Configure vlan on CHR in proxmox.Are your Proxmox interfaces (vmbr0...) configured to be VLAN aware?
-
news reacted to Max Carrara's post in the thread First backup of a single vm, to PBS runs VERY VERY slowly with Like.
Hmm, I see—assuming that your datastore is on that Crucial NVMe SSD, I think that the host memory buffer might be at fault here, then. The problem with an HMB is that it (eventually) will cause performance to degrade during random reads/writes... -
Ddragon0005 posted the thread Double drive failure on zfs RAID 1. Any suggestions on how to debug? in Proxmox VE: Installation and configuration.I had proxmox running on a zima blade, with two HDD on RAID1 (zfs in proxmox). It stopped working and the pool disappeared. I tried to check if either of the drives could be read for the data on my pc , but it turns out, both drives have failed...
-
KKingneutron reacted to why-be-banned's post in the thread problem in passthroughing USB tethering to VM with Like.
Thanks for your reply, I have bought a 5G CPE device, it has Ethernet ports.
