Latest activity
-
Ffredetech reacted to fba's post in the thread Proxmox claims /var/tmp has no space despite it does with
Like.
Why do you thinkt the stalling upload is related to /var/tmp? This warning is totally common. Do you have any other messages indicating an issue with this folder? Try to copy the iso via CLI instead. Local storage uses /var/lib/vz/template/iso to... -
WIt would probably be better to install Tailscale into a VM or LXC and access the PVE host via that guest.
-
RRares replied to the thread [SOLVED] Configure vlan on CHR in proxmox.Are your Proxmox interfaces (vmbr0...) configured to be VLAN aware?
-
news reacted to Max Carrara's post in the thread First backup of a single vm, to PBS runs VERY VERY slowly with Like.
Hmm, I see—assuming that your datastore is on that Crucial NVMe SSD, I think that the host memory buffer might be at fault here, then. The problem with an HMB is that it (eventually) will cause performance to degrade during random reads/writes... -
Ddragon0005 posted the thread Double drive failure on zfs RAID 1. Any suggestions on how to debug? in Proxmox VE: Installation and configuration.I had proxmox running on a zima blade, with two HDD on RAID1 (zfs in proxmox). It stopped working and the pool disappeared. I tried to check if either of the drives could be read for the data on my pc , but it turns out, both drives have failed...
-
KKingneutron reacted to why-be-banned's post in the thread problem in passthroughing USB tethering to VM with Like.
Thanks for your reply, I have bought a 5G CPE device, it has Ethernet ports.
-
Eernov replied to the thread 10gbps streaming server. Better with or without proxmox?.you can try rackoona 10Gbps vps for streaming
-
Yyiyang5188 posted the thread The VPUG virtual machine of A16 cannot be started. in Proxmox VE: Installation and configuration.I used PVE+A16(64G)+256G memory and allocated 10 virtual machines, one of which was allocated 4G video memory. When the virtual machine is started, 3-5 virtual machines can be started normally, and after a few hours, other virtual machines cannot...
-
-
Mmr.hollywood replied to the thread [SOLVED] Intel NIC e1000e hardware unit hang.Don't let me talk you out of it. Two hours of iperf3 so far without issues. And just now, I edited the config file to be as the last poster suggested, or atleast similar, and I'm going to test it again. I'm now testing: auto lo iface lo inet...
-
readyspace replied to the thread [EDIT: Mellanox NIC not working] VMs not connecting after change to vmbr0.Good find — that explains it. If you still get a response with the fiber unplugged, the link was never actually active. Check that your SFP+ modules or DAC cables are compatible with the HP 546SFP+ (Mellanox ConnectX-3 Pro), and run ethtool... -
readyspace replied to the thread Host connection issues with the VMs..Hi, please share more information as following if possible: Host network config: post the relevant parts of /etc/network/interfaces (or whatever file you use) showing eno1, the bridge (vmbr), and how they’re connected. VM NIC info: inside the...
-
readyspace replied to the thread How to read SFP+ module details from Mellanox ConnectX-2 MNPA19-XTR.Hi @logan893 , yes you are right. the older card doesnt have the necessary drivers for what you are looking for.
-
readyspace replied to the thread config issue with multiple VLAN and cisco device.Thanks for sharing your config — you’re almost there. A few quick points: Keep only one bridge (vmbr0) — you already made it VLAN-aware, so no need to create vmbr0.110 unless the Proxmox host itself needs an IP inside that VLAN. For your VMs...
-
Nneponn replied to the thread [SOLVED] Intel NIC e1000e hardware unit hang.OK - that's super interesting. And I've twigged that perhaps I've missed the point a bit. I was thinking of this as a problem that materialised on VM guests, but now I'm thinking the workaround (disabling GSO / TSO) is probably applied to the...
-
TThanking you - for me the ID was "pve--OLD--85E6E6D......" and I needed to remove sub-entities first.
-
Llanepark5033 replied to the thread First backup of a single vm, to PBS runs VERY VERY slowly.Thanks Max for taking the time to research the info regarding HMB. Thou I knew about HMB and nvme devices I was unaware that HMB only stores some of the FTL and will constrain random reads and random writes. Actually a backup of a newly...
-
Nnathansurendran reacted to fiona's post in the thread Proxmox Virtual Environment 9.0 released! with Like.
Hi, Then report the issue to Google please and not here ;) And I suggest you read up more on what LLMs can and cannot do and not just trust marketing hype.
-
Nnathansurendran reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.0 released! with Like.
Eh, I would not trust "AI" too much, especially not for any integrity things and if it's just comparing a simple string... The SHA256 sum from proxmox-ve_9.0-1.iso is indeed 228f948ae696f2448460443f4b619157cab78ee69802acc0d06761ebd4f51c3e as...
-
Ddlasher posted the thread PVE9: Coral Driver install script in Proxmox VE: Installation and configuration.Found here : https://rovingclimber.com/2025/08/08/coral-tpu-driver-install-for-proxmox-9-0-debian-13/ Worked EXCEPT had to change to the forked coral-DKMS drivers found here : https://github.com/feranick/gasket-driver wget -qO -...
-
Uuzumo reacted to _gabriel's post in the thread VE 8.4.0 - SQL2022 VM - IO sluggish, RDP connection very laggy with Like.
I don't think so , ZFS writes slower because of integrity and checksum. Can be faster in reads operations thanks to ARC caching. I'm not sure if powershell is reliable to benchmark IOPS. It doesn't matter, now test the same on a Windows...
