Latest activity
-
bbgeek17 replied to the thread open-iscsi-service failed to start after update to Proxmox 9.0.10 (6.14.11-3-pve).Hi @AndreasS , you may find this article helpful as you work on a solution: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/#understand-multipath-reporting-for-your-device Blockbridge : Ultra low latency all-NVME shared storage... -
AAndreasS replied to the thread open-iscsi-service failed to start after update to Proxmox 9.0.10 (6.14.11-3-pve).I know, there are 8 ports on our storage, 4 of them can be connected (10.xxx.19.yyy IP-Range), the other 4 ports (10.aaa.20.bbb) are for intra-storage replication, nevertheless the appliance announces all 8 corresponding IP-addresses for 8...
-
bbgeek17 replied to the thread HyperV to PVE migration - Windows VM boot issues - local-lvm disk vs shared disk.Sounds good! Let us know what you find. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Ooli9511 replied to the thread No network access until "ip link set".I just had the problem again on a brand new host running PVE 9. The workaround above still works, but I still do not understand what triggers it.
-
fiona replied to the thread open-iscsi-service failed to start after update to Proxmox 9.0.10 (6.14.11-3-pve).The service failed with exist status 8, which is ISCSI_ERR_TRANS_TIMEOUT - connection timer expired while trying to connect. according to the manual man 8 iscsiadm. and this can also be seen in the logs you posted, e.g. Oct 09 11:30:32 prox02... -
66equj5 reacted to Mr. Hobbybyte's post in the thread Win2003/Win2k8 R2: ACPI\QEMU\VGID driver missing with
Like.
A somewhat older topic, but still relevant, and since I had to search for it for a while, here's the solution: Download the appropriate drivers from... -
Llogan893 replied to the thread Force PCIe port downgrade at boot (or solve AER errors).One more test with the X540 NIC: I taped over the contacts for the three additional data paths of the x4 portion, leaving only x1 connected, and the card is now detected as PCIe 2.0 x1. No errors, which is good, but obviously performance is...
-
Jjanus57 replied to the thread [SOLVED] Running containers on ZFS, not using "dir" storage.Hi, No, you first need to download a template, then after that the next step which is "disks" (on your screen) you will be able to create the disk. Example : Best regards,
-
-
Ttemplar replied to the thread Excessive amount of DNS queries to domainname of metric server.Could you please elaborate it?
-
Ttemplar reacted to songworks's post in the thread Excessive amount of DNS queries to domainname of metric server with Like.
But shouldn't it at least honor the Time-To-Live of the DNS records? AdGuards default TTL for rewritten domains is 10 seconds. Interestingly, that fit my timings with this issue. So I changed it to something higher, but that made no apparent...
-
Ddespens replied to the thread [SOLVED] Running containers on ZFS, not using "dir" storage.Thank you Andreas! Am I understanding correctly that I should create a container template and set it to use rpool? The "Template" selector on container creation is empty, see screenshots below. But I cannot find where to create and/or edit...
-
-
Nnext40 replied to the thread [TUTORIAL] Broadcom NICs down after PVE 8.2 (Kernel 6.8).Supermicro platform AS-1014S-WTRT with motherboard H12SSW-NT update success ! Bios version 3.3 BMC version 03.10.45 BCM57416(B1) firmware version before upgrade: 218.0.153.0 firmware version after upgrade: 231.0.153.0 Command: niccli -i 1...
-
Jjanus57 replied to the thread proxmox 7 update to 8 error.Hi, No, never ! Either use apt full-upgrade or apt dist-upgrade Best regards,
-
jsterr reacted to VictorSTS's post in the thread iSCSI where to put ISOs or Import-Images? with Like.
I would have tried to: - create another LUN in the iSCSI storage - connect it manually on one node - create an ext4 on it - mount it on that single node at /nnt/IMPORT - add it to PVE as directory storage in just that host. Essentially the same... -
Hhurenkam posted the thread Bundle resources to be assigned together? in Proxmox VE: Installation and configuration.My proxmox server has several resources that I typically assign using raw pci device assignment, thus adding GPU,USB,LAN resources for 3 different seats on a per VM basis. That makes assignment very rigid, and I would much prefer to use the new...
-
Llogan893 replied to the thread Force PCIe port downgrade at boot (or solve AER errors).I found a way to manually downgrade PCIe link speed to PCIe 1.0 during runtime, and the errors for the Intel X540 NIC have completely gone away. Not ideal having only PCIe 1.0 x4 but I can achieve over 6.4-6.7 Gbps throughput in one direction at...
-
-
Mmrcheap1984 replied to the thread e1000 driver hang.Will do, just ordered an Intel X520-DA2 card, just got to arrive.. I also created an cron script to run every 45 minutes and if there's no connectivity it will reboot the machine. It's more a workaround that a resolution but should hopefully...
-
Llogan893 replied to the thread How to read SFP+ module details from Mellanox ConnectX-2 MNPA19-XTR.Tried both PVE8 and PVE9, but not sure which commands may give details, if any. Once I have a remote endpoint to connect this NIC to, I will be able to tell if the link comes up at all. I have read about others having difficulty using this old...
-
Kkosnar replied to the thread proxmox 7 update to 8 error.Hi tayra, Have you managed to solve it yet? (then mark the thread as solved) The problem is your PVE version. You currently have version 7.1, but you need to update to version 7.4 before upgrade to version 8. You should install updates either...
-
MThis is where I'm at right now. What options exist without these issues? This is somewhat related to another thread I commented in. I honestly just want the network issues to be gone. They've been reduced, but not eliminated. Please let me...
