Latest activity
-
Ssherifhassan21 posted the thread Request for Guidance on VM Specifications for Domain Controller Setup in Proxmox VE: Installation and configuration.Dear Team, I kindly seek your support and expertise regarding the optimal configuration for a new virtual machine that I intend to deploy on a Proxmox environment. I have already set up Proxmox on the physical server detailed below, and I am...
-
Kkalle3 replied to the thread Datacenter ACME Accounts Add Customer account field is missing.Oh, wonderful, that's how it works. Thank you for your help. pvesh create /cluster/acme/account --contact name@domain.com --name <account_name> --eab-kid <eab-kid> --eab-hmac-key <eab-hmac-key> --directory...
-
Kkobold81 replied to the thread Passthrough:.ok, found the solution: Somehow, the reimported image did not really work. While it booted without passthrough, some programms could not start. Also, my formerly working vm config does not work for the newest win 11 release. So, I created a...
-
Ppatric83 replied to the thread Old kernel used during boot.Hi, uname -a proxmox-boot-tool status proxmox-boot-tool kernel list I've tried to pin 6.14.11-3-pve but didn't help during boot /Patric
-
Jjanus57 replied to the thread Old kernel used during boot.Hi, What is the return of these commands : uname -a proxmox-boot-tool status proxmox-boot-tool kernel list Best regards,
-
dcsapak replied to the thread Datacenter ACME Accounts Add Customer account field is missing.ah ok, so that too is missing.. don't worry, there is still a way that should work ;) you can directly use the api or use the cli helper tool 'pvesh' (which exposes the whole api on the cli) pvesh create /cluster/acme/account --contact... -
YYungErrorHunter replied to the thread LXC bind mount of NFS folder: "Stale file handle".Found your thread while trying to find the cause for this myself. This could have multiple causes, but in my case using TrueNAS, I had maproot set to the user I want, not mapall. So the user (/their mapped ID) within the LXC had no permissions...
-
Ppatric83 posted the thread Old kernel used during boot in Proxmox VE: Installation and configuration.Hi, A newbie here! So I've seen that Proxmox has installed new kernels with the latest being 6.14.11-3-pve but when I boot I still get 6.14.8-2-pve After talking with AI I figured out that I'm booting to Boot0000 proxmox GRUBX64.EFI And that...
-
Uuzumo replied to the thread VE 8.4.0 - SQL2022 VM - IO sluggish, RDP connection very laggy.I recall that with older CPUs, performance was only about 1/3 of what could be achieved with physical hardware *regardless of the connection method This is not the case with the latest CPUs It might be slowing down due to vulnerability fixes or...
-
Kkalle3 replied to the thread Datacenter ACME Accounts Add Customer account field is missing.Sorry, that doesn't work because you can't specify the keyid and key in the cli command like you can via the GUI on the node. pvenode acme account register pvecluster1 name@domain.com --directory...
-
DDomino replied to the thread Custom Machine Types.I've combined this into a formal request: https://bugzilla.proxmox.com/show_bug.cgi?id=6909
-
AAndreasS replied to the thread Is PVE9 supported on Veeam 12.3?.Hi Victor, restore on Hyper-V is working for me in general, but I don't have and ESXi for testing. Do you have subscription with Veeam? Their support is quite good. Regards, Andreas
-
LYes, i saw that, i also understand that its not recommended. But on this point. Is the recommendation related to the fact the if the node fails you cand access the backup ? Or some other problems ? Like package conflicts, etc ?
-
AAndreasS replied to the thread open-iscsi-service failed to start after update to Proxmox 9.0.10 (6.14.11-3-pve).Hi Fiona, those two are reasonably small and secret, how can I share full logs without compromising internal information e.g. IP-addresses and servernames etc. in here?
-
Iikalafat replied to the thread HyperV to PVE migration - Windows VM boot issues - local-lvm disk vs shared disk.Hi @bbgeek17 thanks for info. I have found out this thread https://forum.proxmox.com/threads/ubuntu-vm-wont-start-when-cloned-to-lvm-iscsi-shared-storage-local-storage-ok.141237/page-2 that seems to be related as it describes similar process...
-
OOnslow replied to the thread Proxmox v8.4.14 | Error.Are you, by chance, using a VLAN in Proxmox?
-
Fthis is likely the same issue also affecting pve-subscription, since both use the same underlying HTTP client: https://bugzilla.proxmox.com/show_bug.cgi?id=6791
-
VictorSTS posted the thread Is PVE9 supported on Veeam 12.3? in Proxmox VE: Installation and configuration.Hello, Is Veeam restore working for you with PVE plugin v12.1.5.17 either with PVE9 or PVE8.x? Recently Veeam has published PVE plugin v12.1.5.17 which should support PVE9 [1]. Tried using it to restore some backups made from ESXi but after... -
Eem.tie replied to the thread backup VMs and Containers on "offline" node.Hi, thanks for asking, and sorry for beeing that unprecise. I first tried to backup via vzdump 100 --storage local but that resulted in the error message: could not activate storage "local": storage local is disabled cloud not get storage...
-
fiona replied to the thread open-iscsi-service failed to start after update to Proxmox 9.0.10 (6.14.11-3-pve).Hi, the service runs fine for me. Please share the full system logs/journal from around the time of the failure as well as the output of pveversion -v.
