Latest activity
-
Kkagehisa posted the thread Parallel use of PBS and Veeam Backup in Proxmox Backup: Installation and configuration.Hi, at the moment we are running two PVE Clusters on site together with a PBS. This works fine and we would like to keep the PBS. But in order to fulfill the security standards of our company we would need to store our backups on a second site...
-
THallo zusammen, ich habe auf meinem Proxmox eine VM mit Windows 11 installiert. Mit dieser VM wollte ich probieren, mein 3D Drucker zu betreiben, der über eine Cloud kommuniziert. Das ganze von Bambulab. Aber ich bekomme immer eine...
-
-
Rrjcab replied to the thread CTX with no particular conf and USB.Thanks for the prompt reply: so I understand that the path must be /dev/xxx but I don't know it as it is not configured yet in the CTX till the start of the CTX ? e
-
-
Kkosnar replied to the thread Status Unkown Icons.Hi Vyspa-NB, it looks like you look on status of PVE v9 from PVE v8. Try to login to upgraded node a check the status again. R.
-
Sseb4itik replied to the thread Slow memory leak in 6.8.12-13-pve.I will replace 6.14.11-3-pve with 6.8.12-11-pve tomorrow morning on all nodes. Since I have no plan to add charges in the next few days, it will be a good way to compare.
-
Bbl1mp replied to the thread Empfehlung NAS ? altes synology oder OMV?.Es gäbe noch die Variante mit lokalem Storage am PVE, falls der Lenovo Tiny genug Storage Interfaces hat. (ggf. über den PCIe Slot erweiterbar) Das ist einfach zu konfigurieren und profitiert in der Performance davon, dass der Storage nicht am...
-
G_gabriel replied to the thread VM en erreur : io-error.il faut vérifier la taille sur l'hôte PVE directement pas dans la VM : apt install ncdu ncdu /mnt/pve/Nextcloud
-
fschauer replied to the thread CTX with no particular conf and USB.lsusb listing all USB devices is expected, since it reads the USB device list out of the sysfs which is mounted into the container. But you cannot access the USB device without explicitly passing it through. There is a simpler way to pass a... -
Aabobakr replied to the thread 1 node of cluster not communication with others.Hello, Did you managed to solve it? If not, Please provide the output of the following cmds from the known working node and one of the working nodes: ~# corosync-cfgtool -n ~# cat /etc/pve/.members ~# cat /etc/hosts Also, Verify the ssh access...
-
shanreich replied to the thread [SOLVED] Can't get VLAN to work.What do you mean by this? How do you configure the network inside your VM? Can you post its network configuration? Also, you cannot use 172.16.5.0 as the address for your host inside the /24 - since it is a reserved address so you'd need to use... -
shanreich replied to the thread Network repair with ifreload -a after reboot.Configuring an IP / Gateway like that will not "use up" the VLAN on vmbr1 - it will still be available for VMs to use.
-
Bblbecek replied to the thread Debian 13 lockup on reboot.cool! Thanks for the suggestion with Standard VGA. I think I only tried the "advanced ones" before, but it actually makes sense to choose the screen type with less capabilities possible (as I still think it has something to do with the display...
-
Ddrnicolas posted the thread VM mit Windows server 2016 startet auf einmal nicht mehr in Proxmox VE (Deutsch/German).ich habe eine VM mit WIndows Server 2016. Seit kurzem startet diese nicht mher. Es kommt immer die automatische reparatur, die natürlich wie immer das problem nicht löst. Urspünglich waren die Fetsplatten als SCSI, Änderung auf SATA hat nichts...
-
GGavino replied to the thread Debian 13 lockup on reboot.Thanks so much for the feedback. I re-read my post and it is a bit misleading. I said "from the CLI" and I meant from the Debian guest VM CLI (with "sudo reboot" or "sudo shutdown") but actually it doesn't matter if it's that way, or by using the...
-
shanreich replied to the thread Problem - SDN.On PVE01 the bridge is VLAN-aware, which explains the difference in generated configuration. Generally it is preferable to use the setup from PVE01 where the bridge is VLAN-aware as it eliminates complexity from the generated configuration (no...
-
Ggrefabu posted the thread Clusterweites Internes Netzwer - DNS Verständnisproblem? in Proxmox VE (Deutsch/German).Moin, ich habe einen Testaufbau mit einem 3 Knoten Cluster. Auf diesem Cluster möchte ich jetzt gerne verschiedene Umgebungen erzeugen um verschiedene Setups zu simulieren. z.B. mache ich zur Zeit Tests mit opnsense und HA, dadurch...
-
Aabobakr replied to the thread Status Unkown Icons.Hello, I assume you have already found a solution. If not, could you provide the output for the following cmds from CLI: root@node7:~# pvecm status root@node7:~# corosync-cfgtool -n Also, Verify the ssh access between the nodes. Did you get...
-
fba replied to the thread [SOLVED] Can't get VLAN to work.What do you want to achieve by using a VLAN? There is a part in the PVE Administration guide describing various setups: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_choosing_a_network_configuration -
Rrjcab posted the thread CTX with no particular conf and USB in Proxmox VE: Installation and configuration.Hello, Here below my conf of my ctx: root@pve:~# cat /etc/pve/lxc/109.conf #lxc.cgroup.devices.allow%3A c 189%3A43 rwm #lxc.mount.entry%3A /dev/bus/usb/001/043 dev/ttyUSB1 none bind,optional,create=file arch: amd64 cores: 1 features: nesting=1...
-
Llockmartkyushu posted the thread Auto install through iPXE (for Proxmox v8 and v9) in Proxmox VE: Installation and configuration.Can anyone explain to me briefly how to use ipxe to launch the proxmox iso installer. I have tried the automated installation docs and built a ISO with the answer.toml, but I just cant seem to boot proxmox8 or proxmox9 via the initrd/linux26...
