Latest activity
-
TtechnikLaser replied to the thread Proxmox VE Installation Probleme [Solved].So, der DL380 gen9 hat keinen raid controller verbaut. Wurde so vom reseller gekauft. Ein Update (SPP) ist aktuell nicht so einfach möglich da kein Vertrag mit HPE besteht. (Nicht sicher ob Kostenübernommen werden, wenn es keine erklärung gibt...
-
spirit replied to the thread How to Enable Continuous Time Sync Between QEMU Guest and Host.never tried it but : https://docs.redhat.com/en/documentation/red_hat_enterprise_linux/7/html/virtualization_deployment_and_administration_guide/chap-kvm_guest_timing_management To enable the PHC device, do the following on the guest OS: Set... -
shanreich replied to the thread QinQ SDN zone not forwarding VLAN traffic to VM bridge (vnet/vmbr chain issue).Can you post the full generated SDN config? cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn Is vmbrQnQ itself VLAN-aware in the network settings? How are you handling the inner tagging? You have a vlan-aware VNet without any tag... -
MMacnamee replied to the thread Random reboots after upgrade from 8.4.5 to 9.0.10.Same issue after upgrading to 9.x I am having issues on a ThreadRipper system, a 9950x and an AMD 8945HS I did an in-place upgrade and throught something may have gone wrong with the upgrade, so I re-installed all the nodes, but I am am still...
-
AAndreasS replied to the thread Proxmox VE 9 vm backup with Veeam Backup & Replication 12.3.2.Quick update, this is still under investigation of Veeam support. With latest Veeam version an most recent Proxmox-plugin it tries to use a Microsoft Hyper-V-helper instead of using Linux-helper/worker (we are backing up Hyper-V-Cluster as well...
-
AAndreasS replied to the thread DNS Configuration problem.Good to know, no worries :)
-
Aahmedmousa replied to the thread DNS Configuration problem.Sorry, but I have figures it out! It turns out that our local dns resolver is not listed :( sorry again
-
AAndreasS replied to the thread DNS Configuration problem.Hey, are you using DHCP by any chance? This will load settings announced by DHCP-Server. Can you post /etc/network/interfaces please. Andreas.
-
shanreich replied to the thread proxmox-network-interface-pinning working and then not..Your interface is name is too long, Linux kernel only supports up to 15 bytes (= 15 ASCII characters). That's most likely why it doesn't work. I'll check what's wrong with validation - but in the meanwhile you should be able to fix your issue by...
-
spirit reacted to Jeeves_'s post in the thread Dutch Proxmox Day 2025 - Free Proxmox Community Event with
Like.
I tore down the group. See you next time! -
AAndreasS reacted to jsterr's post in the thread Wie wird der Remote-Support via SSH umgesetzt - Enterprise-Support with Like.
Muss das Cluster per SSH aus dem Internet erreichbar sein (zumindest temporär) Oder gibt es ein VPN? Oder geht Support via Teamviewer, RustDesk oder Ähnliches etc.? Habe den Remote-Support noch nie gebraucht, dachte ich frage mal nach -...
-
AHi all, by trying to run apt update I am getting dns error, so by pinging test: ping -c 4 1.1.1.1 I am getting this reply: PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. 64 bytes from 1.1.1.1: icmp_seq=1 ttl=55 time=26.2 ms 64 bytes from 1.1.1.1...
-
spirit replied to the thread FC San with lvm-thin in a Cluster.you can't with lvm-thin, because the metadata volume can't be shared. You need to use classic LVM (and snapshot have been added in pve9 for them)
-
Mmhert replied to the thread ZFS quota ignored (?) - pbs backup storage full.Addition: root@bk01:/mnt/datastore/local_backupstorage_bk01# du -shx .chunks/ 15T .chunks/ root@bk01:/mnt/datastore/local_backupstorage_bk01# du -shx * 891M ns 11G Platzhalter.iso root@bk01:/mnt/datastore/local_backupstorage_bk01#
-
Rrjcab replied to the thread Backup File.you are right, thx a lot
-
JJohannes S replied to the thread FC San with lvm-thin in a Cluster.This is NOT supported for shared storage like FC attached SAN since LVM/thin is NOT cluster aware. Your setup is screaming for dataloss, so please don't run anything important on it before rebuilding it in a supported way. Beginning with PVE9...
-
fiona replied to the thread ERROR: job failed with err -61 - No data available.Hi, das bedeutet höchstwahrscheinlich, dass das (physikalische) Speichermedium für die Disk der VM ein Problem hat (gibt auch einige Threads dazu im English-sprachigen Teil). Bitte die System-Logs/Journal überprüfen und Health Check für die Disk... -
Aantochoy replied to the thread High-performing storage switch for Proxmox Ceph Storage.Arista switch with LACP+MLAG
-
cheiss replied to the thread Backup File.Hi, you are probably looking for /etc/pve/jobs.cfg, which keeps all backup job definitions. -
JJohannes S reacted to jsterr's post in the thread Wie wird der Remote-Support via SSH umgesetzt - Enterprise-Support with Like.
Der Standardsupport und Premium-Support enthält: Remote support (via SSH)