Latest activity
-
Kkjanas replied to the thread Same MAC on multiple bridge ports.Hi there! We had a similar issue on our side: https://forum.proxmox.com/threads/network-issues-with-ceph-after-proxmox-node-restart-ovs-mtu-8900.163825/ You need to set arp_ignore=2 in sysctl.
-
Ist natürlich an valider Ansatz, aber ich bin da wiederum zu Faul. ;) Ich favorisiere in so einer Konstellation lieber einen Cluster, auch gern Active/Backup, also alle VMs auf einem Node und die PBS VM dann auf dem anderen. Wenn man Replikation... -
Falk R. replied to the thread Migration Fehler.Ist natürlich an valider Ansatz, aber ich bin da wiederum zu Faul. ;) Ich favorisiere in so einer Konstellation lieber einen Cluster, auch gern Active/Backup, also alle VMs auf einem Node und die PBS VM dann auf dem anderen. Wenn man Replikation... -
Ggfngfn256 replied to the thread [SOLVED] Problem with "Removable Bootloader".See this post.
-
Mmacromoon replied to the thread Dell EMC ML3 Support.on lto drive port1 blinking after i connect FC cable (There is data transfer between devices). On FC card in server same blinking activity diodes.
-
-
Kkjanas replied to the thread [SOLVED] Network issues with Ceph after Proxmox node restart (OVS, MTU 8900).The issue was caused by duplicate MAC addresses in the ARP table. To resolve it, we configured the following on every Proxmox node: We added these parameters to /etc/sysctl.conf (or to a dedicated file under /etc/sysctl.d/, e.g...
-
Ggrefabu replied to the thread Migration Fehler.Ich habe die beiden Maschinen bewusst nicht im Cluster. Die eine ist der Backupserver, der hält aber auch Ressourcen für interim Viertualisation bereit. Wenn ich den eigentlichen VE Host patche, schiebe ich immer ein paar VMs kurz rüber. Ist...
-
Mmronet reacted to Mog's post in the thread [SOLVED] Proxmox reports VM disks don't exist only on startup with
Like.
Thanks for this, I somehow didn't turn this up while I was looking for a way to delay VM/CT startups. I just tried this out by moving my disks all back to the directory storage and adding a delay of 30s on the node, and things are looking good... -
SSakamoto replied to the thread Node showing question mark.Now looks like all LUNs have 4 path after I run ( echo "- - -" > /sys/class/scsi_host/host4/scan ) for my both host. I have 2 host, host3 and host4. I run the command for both host.
-
-
Rraw_packets replied to the thread Same MAC on multiple bridge ports.Can anyone help me with this?
-
Oorsiris replied to the thread Shared storage recommendations..So what do you use ?
-
Wwolfgang-h2JEqEz replied to the thread SDN : Mismatch AFI with BGP controller IPv6 session?.Thanks for your instructions. Combining IPv4 and IPv6 neighbours in the same peer-group works.
-
Cczechsys replied to the thread GeForce RTX™ 5090 as vGPU.https://forum.proxmox.com/threads/nvidia-vgpu-software-18-support-for-proxmox-ve.163153/
-
WYour requirements are in places contradictory and make no sense (fabric-on-ZFS or ZFS-over-fabric), you can’t have synchronous data over asynchronous systems. But those that aren’t in what you need is in Ceph and TrueNAS, both are plenty...
-
WHey, I have a budget for Yugo. I want someone to build me a Porsche 911 equivalent out of parts from AliExpress. Can you help?
-
Teletrend AG replied to the thread Problem with worker VM start initiated by Veeam on PVE.I'm just wondering why the Veeam worker test never had failed so far (and I've tried it almost every time the backup failed). -
UdoB replied to the thread CPU and Memory Usage is High.Maybe this page gives some hints: https://pve.proxmox.com/wiki/Windows_10_guest_best_practices
-
AFAIK, you need a different, non-gaming, card to use Nvidia vGPU feature: https://docs.nvidia.com/vgpu/gpus-supported-by-vgpu.html
-
If both have ZFS I would go with ZFS send/receive since then you can also transfer the snapshots which together with zfs-auto-snapshot will give you a history of your files. If you don't have ZFS on both sides I would go with a dedicated tool...
-
SSkorpiuz replied to the thread Mails from whitelisted domain goes to quarantine.I don't understand, some messages are delivered normal, but other put to the quarantine from the same domain.
