Hello.
Just upgraded 3-node cluster with latest Proxmox 6.2, and now run into the problems.
iSCSI target is targetcli on kvm-fs node (running proxmox with zfs). Was working fine past year.
Nodes are interconnected via Mikrotik 10Gbps switch, with Mellanox Connect-X4 NICs. There is no problems with connectivity currently.
1) I can't restore any VM...
2) I can't start any VM on iscsi-over-zfs disks, it's just saying "TASK ERROR: start failed: QEMU exited with code -1" (no more info), however qm start 105 works just fine (via ssh, thank god).
3) I can't backup disks on iscs-over-zfs... (it's just freezes, waited for hour for 32gb disk).
Any idea what's going on and what to do ? Thank you.
Just upgraded 3-node cluster with latest Proxmox 6.2, and now run into the problems.
Code:
pve-manager/6.2-11/22fb4983 (running kernel: 5.4.60-1-pve)iSCSI target is targetcli on kvm-fs node (running proxmox with zfs). Was working fine past year.
Nodes are interconnected via Mikrotik 10Gbps switch, with Mellanox Connect-X4 NICs. There is no problems with connectivity currently.
1) I can't restore any VM...
Code:
restore vma archive: lzop -d -c /mnt/pve/transit/dump/vzdump-qemu-105-2020_09_16-14_16_13.vma.lzo | vma extract -v -r /var/tmp/vzdumptmp5575.fifo - /var/tmp/vzdumptmp5575
CFG: size: 568 name: qemu-server.conf
DEV: dev_id=1 size: 131072 devname: drive-efidisk0
DEV: dev_id=2 size: 107374182400 devname: drive-scsi0
CTIME: Wed Sep 16 14:16:15 2020
new volume ID is 'scsi-01:vm-100-disk-2'
new volume ID is 'scsi-01:vm-100-disk-3'
map 'drive-efidisk0' to 'iscsi://172.16.32.2/iqn.2003-01.org.linux-iscsi.kvm-fs.x8664:sn.2a9f108b8cc6/2' (write zeros = 1)
map 'drive-scsi0' to 'iscsi://172.16.32.2/iqn.2003-01.org.linux-iscsi.kvm-fs.x8664:sn.2a9f108b8cc6/3' (write zeros = 1)
vma: can't open file iscsi://172.16.32.2/iqn.2003-01.org.linux-iscsi.kvm-fs.x8664:sn.2a9f108b8cc6/2 - iSCSI: Failed to connect to LUN : Failed to log in to target. Status: Authorization failure(514)
/bin/bash: line 1: 5577 Broken pipe lzop -d -c /mnt/pve/transit/dump/vzdump-qemu-105-2020_09_16-14_16_13.vma.lzo
5578 Trace/breakpoint trap | vma extract -v -r /var/tmp/vzdumptmp5575.fifo - /var/tmp/vzdumptmp5575
temporary volume 'scsi-01:vm-100-disk-2' sucessfuly removed
temporary volume 'scsi-01:vm-100-disk-3' sucessfuly removed
no lock found trying to remove 'create' lock
TASK ERROR: command 'set -o pipefail && lzop -d -c /mnt/pve/transit/dump/vzdump-qemu-105-2020_09_16-14_16_13.vma.lzo | vma extract -v -r /var/tmp/vzdumptmp5575.fifo - /var/tmp/vzdumptmp5575' failed: exit code 1332) I can't start any VM on iscsi-over-zfs disks, it's just saying "TASK ERROR: start failed: QEMU exited with code -1" (no more info), however qm start 105 works just fine (via ssh, thank god).
3) I can't backup disks on iscs-over-zfs... (it's just freezes, waited for hour for 32gb disk).
Any idea what's going on and what to do ? Thank you.