Hi Proxmox community,
Problem: Windows VM (ID 133) stops working, reports C: drive full (but no red bar in Explorer), writes freeze - BUT Explorer and chkdsk shows a lot of free space.
On ZFS Host there seems to be a lot of space left:
VM-133 disk: 508G used (274G actual + 234G reservation) - Pool has 3.74 TB storage left?
Do you see any problem here?
Is it a host storage vs Windows VM confusion? Or a pure Windows issue?
It would also help if you can confirm that the ZFS settings you see are correct.
Then I can rule out one potential issue. Thanks!
I'm stuck and grateful for any advice – can't go productive without this fixed!
Thanks a lot!
Raid007
Problem: Windows VM (ID 133) stops working, reports C: drive full (but no red bar in Explorer), writes freeze - BUT Explorer and chkdsk shows a lot of free space.
On ZFS Host there seems to be a lot of space left:
Code:
root@pve1:~# zfs list -o space
NAME AVAIL USED USEDSNAP USEDDS USEDREFRESERV USEDCHILD
ZFS_VM_POOL 3.74T 3.12T 0B 96K 0B 3.12T
ZFS_VM_POOL/VMPOOL 3.74T 3.11T 0B 192K 0B 3.11T
ZFS_VM_POOL/VMPOOL/vm-110-disk-0 3.78T 66.0G 0B 32.3G 33.7G 0B
ZFS_VM_POOL/VMPOOL/vm-110-disk-1 3.83T 107G 0B 23.1G 83.5G 0B
ZFS_VM_POOL/VMPOOL/vm-110-disk-2 3.74T 3M 0B 276K 2.73M 0B
ZFS_VM_POOL/VMPOOL/vm-111-disk-0 3.99T 310G 0B 56.8G 253G 0B
ZFS_VM_POOL/VMPOOL/vm-111-disk-1 3.94T 208G 0B 11.9G 196G 0B
ZFS_VM_POOL/VMPOOL/vm-111-disk-2 3.74T 3M 0B 276K 2.73M 0B
ZFS_VM_POOL/VMPOOL/vm-113-disk-1 3.97T 508G 0B 275G 233G 0B
ZFS_VM_POOL/VMPOOL/vm-114-disk-0 3.86T 152G 0B 31.2G 121G 0B
ZFS_VM_POOL/VMPOOL/vm-115-disk-0 3.74T 3M 0B 260K 2.75M 0B
ZFS_VM_POOL/VMPOOL/vm-115-disk-1 3.79T 102G 0B 56.9G 44.6G 0B
ZFS_VM_POOL/VMPOOL/vm-115-disk-2 3.74T 6M 0B 96K 5.91M 0B
ZFS_VM_POOL/VMPOOL/vm-115-disk-3 3.87T 406G 0B 273G 134G 0B
ZFS_VM_POOL/VMPOOL/vm-115-disk-4 3.81T 254G 0B 189G 64.4G 0B
ZFS_VM_POOL/VMPOOL/vm-123-disk-0 4.03T 569G 0B 274G 294G 0B
ZFS_VM_POOL/VMPOOL/vm-133-disk-0 3.97T 508G 0B 274G 234G 0BVM-133 disk: 508G used (274G actual + 234G reservation) - Pool has 3.74 TB storage left?
Do you see any problem here?
Is it a host storage vs Windows VM confusion? Or a pure Windows issue?
It would also help if you can confirm that the ZFS settings you see are correct.
Then I can rule out one potential issue. Thanks!
I'm stuck and grateful for any advice – can't go productive without this fixed!
Thanks a lot!
Raid007
Last edited: