Win 2008 R2 64 Bits carte réseau Virtio code erreur 39

[tesquenure]

Hi,

I have code error 39 after install driver network virtio.
I use Win7/64 from virtio-win-0.1-74.iso
On proxmox :
proxmox-ve-2.6.32: 3.1-114 (running kernel: 2.6.32-26-pve)
pve-manager: 3.1-21 (running version: 3.1-21/93bf03d4)
pve-kernel-2.6.32-26-pve: 2.6.32-114
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.1-8
pve-firmware: 1.0-23
libpve-common-perl: 3.0-8
libpve-access-control: 3.0-7
libpve-storage-perl: 3.0-17
pve-libspice-server1: 0.12.4-2
vncterm: 1.1-4
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-17
ksm-control-daemon: 1.1-1
glusterfs-client: 3.4.1-1

What do i miss ?
Merci.

 

[bhennigar]

Is this a new install? You could try stopping the VM, remove the Virtio network device and then add a new one. I did not have any issues upgrading my virtio drivers 0.1-74 on multiple Windows server 2008R2 servers.
This guide may help http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

 

[tesquenure]

Hi Bhennigar,
Yes, its a new install. I juste try stop delete and add, that dont solve the issue.
Read the guide, its for USB device, i dont realy understand how it can solve this issue ?
I look the register and i dont have lower or upper in this key.

misterious

 

[bhennigar]

You're right, the Virtio network is detected as a PCI device, not USB.

Did you use the same ISO for the Virti hard drive and Ballooning? It could be that the driver is corrupt. Delete the ISO from proxmox and download the ISO again

 

[tesquenure]

Hi,
Download the iso again and reinstall the server. All works now.
Thx Bhennigar.