Hi there.
HPE Proliant DL380 GEN10. Verified pass-through enabled, and also used it for a GPU and again verified. I have 4 NIC's, seems 0,1,2,3. I choose, and verify, NIC #4 which is 0000:02:00.3. I apply it and start the VM and it all crashes. The only error I see is;
But I also get this, so I assume it is working;
HPE Proliant DL380 GEN10. Verified pass-through enabled, and also used it for a GPU and again verified. I have 4 NIC's, seems 0,1,2,3. I choose, and verify, NIC #4 which is 0000:02:00.3. I apply it and start the VM and it all crashes. The only error I see is;
Code:
kvm: -device vfio-pci,host=0000:02:00.3,id=hostpci0,bus=pci.0,addr=0x10: vfio 0000:02:00.3: failed to setup container for group 54: Failed to set iommu for container: Operation not permitted
TASK ERROR: start failed: QEMU exited with code 1But I also get this, so I assume it is working;
Code:
dmesg | grep IOMMU
[ 0.000000] DMAR: IOMMU enabled
[ 0.000000] DMAR-IR: IOAPIC id 10 under DRHD base 0xfbffc000 IOMMU 0
[ 0.000000] DMAR-IR: IOAPIC id 8 under DRHD base 0xc7ffc000 IOMMU 1
[ 0.000000] DMAR-IR: IOAPIC id 9 under DRHD base 0xc7ffc000 IOMMU 1