web gui dont work via vpn

[Dmitrix]

proxmox-ve: 4.2-48 (running kernel: 4.4.6-1-pve)
pve-manager: 4.2-2 (running version: 4.2-2/725d76f0)
pve-kernel-4.4.6-1-pve: 4.4.6-48
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-39
qemu-server: 4.0-72
pve-firmware: 1.1-8
libpve-common-perl: 4.0-59
libpve-access-control: 4.0-16
libpve-storage-perl: 4.0-50
pve-libspice-server1: 0.12.5-2
vncterm: 1.2-1
pve-qemu-kvm: 2.5-14
pve-container: 1.0-62
pve-firewall: 2.0-25
pve-ha-manager: 1.0-28
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5-pve9~jessie

Through the local network 192.168.0.0 everything works well, but when I join the work network via VPN then a blank screen appears.
What could it be?

 

[JayC]

You need at add a route on the host to your VPN network. I had to do the same to reach my remote subnets as the PM host is not technically on your lan like the VM's are.

 

[Dmitrix]

You need at add a route on the host to your VPN network. I had to do the same to reach my remote subnets as the PM host is not technically on your lan like the VM's are.

That's exactly what I did. Other web servers open normally.
Look at the ff errors.

 

[_gabriel]

was working here on pve 6 with openvpn client directly on host
upgraded to pve 7 and same blank screen.
did you find a solution ?

 

[_gabriel]

webgui of pbs (installed on pve host) loading correctly over openvpn
webgui of pve over stunnel ok but over directly openvpn webgui keep blank page :-(

 

[_gabriel]

for my case , it was only slow internet connection. the weird thing was pbs webui was loading and pve kept blank.
now all speedy