[SOLVED] VZDump Problem - err -5 - Input/output error

[uds-solutions]

INFO: starting new backup job: vzdump 101 --node uds-server --storage Backup-GE --compress lzo --mode snapshot --remove 0 INFO: Starting Backup of VM 101 (qemu) INFO: Backup started at 2021-01-14 15:29:30 INFO: status = running INFO: VM Name: UDS-WinSRV19 INFO: include disk 'sata0' 'PVE:vm-101-disk-0' 450G INFO: backup mode: snapshot INFO: ionice priority: 7 INFO: creating vzdump archive '/Disk2_1/dump/vzdump-qemu-101-2021_01_14-15_29_30.vma.lzo' INFO: skipping guest-agent 'fs-freeze', agent configured but not running? INFO: started backup task 'd52da5a9-10fd-4cb0-86c5-c9b4ee9d7c31' INFO: resuming VM again INFO: 0% (257.4 MiB of 450.0 GiB) in 3s, read: 85.8 MiB/s, write: 84.0 MiB/s INFO: 1% (4.5 GiB of 450.0 GiB) in 58s, read: 79.1 MiB/s, write: 78.4 MiB/s INFO: 2% (9.1 GiB of 450.0 GiB) in 1m 56s, read: 80.7 MiB/s, write: 80.2 MiB/s INFO: 3% (13.5 GiB of 450.0 GiB) in 2m 48s, read: 87.9 MiB/s, write: 84.2 MiB/s INFO: 4% (18.1 GiB of 450.0 GiB) in 3m 45s, read: 81.6 MiB/s, write: 79.8 MiB/s INFO: 5% (22.5 GiB of 450.0 GiB) in 4m 38s, read: 86.4 MiB/s, write: 85.5 MiB/s INFO: 6% (27.0 GiB of 450.0 GiB) in 5m 31s, read: 86.8 MiB/s, write: 85.7 MiB/s INFO: 6% (29.9 GiB of 450.0 GiB) in 6m 7s, read: 80.1 MiB/s, write: 80.0 MiB/s ERROR: job failed with err -5 - Input/output error INFO: aborting backup job ERROR: Backup of VM 101 failed - job failed with err -5 - Input/output error INFO: Failed at 2021-01-14 15:35:43 INFO: Backup job finished with errors TASK ERROR: job errors

Hallo liebe Community,
ich bin neu hier und trete leider mit einem Problem an euch. Denn das Backup einer VM funktioniert seit einem Tag nicht mehr...
Genügend Speicher ist auf der Backup Platte noch vorhanden die Konfiguriert ist.
Vieleicht hat jemand ja eine Idee, bin mit meinem Latein am Ende.
Danke im Vorraus.

 

[uds-solutions]

Habe vorhin eine E-Mail vom SMART im Postfach gesehen vllt hilft das, ich werd da nicht ganz schlau raus leider...

This message was generated by the smartd daemon running on:

   host name:  uds-server
   DNS domain: tk

The following warning/error was logged by the smartd daemon:

Device: /dev/sdc [SAT], 4 Currently unreadable (pending) sectors

Device info:
WDC WD2000FYYZ-01UL1B1, S/N:WD-WMC1P0068833, WWN:5-0014ee-003bf7271, FW:01.01K02, 2.00 TB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Wed Jan 13 00:45:26 2021 CET Another message will be sent in 24 hours if the problem persists.

 

[uds-solutions]

Edit: Festplatte kaputt, getauscht -> Läuft wieder.
Trotzdem Danke