VLAN and proxmox

[scorp]

Hi folks,

I am trying to connect opnsense vlans with my switch but its not working.

TPLINK SG108PE​

Everything is setup correctly on opnsense static ip, , dhcp firewall rules but iam having problems in my switch.

I have 4 vlans configured on my opnsense but iam just trying to make only 1 to work and iam failing.

On port 1 connected my parent network linked to all my vlans
On port 2 when i try to enable my PVID with my vlan dedicated... iget only apipa
Tryed to manually assign ip but i cant even ping the gateway


Any thoughts?

 

[PwrBank]

Shot in the dark, but verify that the port you're plugging into the on switch is a trunk port. Some switches allow you to have a native VLAN tag on the port too, so lets say you set the native to VLAN 10 on the port, any traffic you want to be on VLAN 10 leave untagged, all other traffic that is tagged will be allow to go to and from that port, if they are allowed to.