Hi Community,
I installed Proxmox on a sata SSD connected with a "USB to sata" adapter to the internal USB port of my Gen10 Microserver.
Once the installation was complete, I deleted the LV data and extended the LV root to the full size of the disk. So I also extended the fs xfs.
I then created a new PV, added it to the VG pve, and recreated the LV data, so that it resided only on the RAID.
Apparently everything works correctly, but only at startup do I see the warnings attached.
In your opinion, what could it depend on? It could be that /dev/sdb3, the PV that contains root and swap, was not recognized initially, but then worked correctly as soon as the system started.
As you can see, the PV indicated as missing at startup is present. Despite this, I still get those warnings on startup.
This is the PV that contained the LVs root, swap, and data and now correctly contains only root and swap.
Thank you in advance for your valuable support,
MC
I installed Proxmox on a sata SSD connected with a "USB to sata" adapter to the internal USB port of my Gen10 Microserver.
Once the installation was complete, I deleted the LV data and extended the LV root to the full size of the disk. So I also extended the fs xfs.
I then created a new PV, added it to the VG pve, and recreated the LV data, so that it resided only on the RAID.
Apparently everything works correctly, but only at startup do I see the warnings attached.
In your opinion, what could it depend on? It could be that /dev/sdb3, the PV that contains root and swap, was not recognized initially, but then worked correctly as soon as the system started.
Code:
root@pve:~# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 5.5T 0 disk
└─sda1 8:1 0 5.5T 0 part
├─pve-data_tmeta 252:0 0 88M 0 lvm
│ └─pve-data-tpool 252:2 0 5.5T 0 lvm
│ ├─pve-data 252:3 0 5.5T 1 lvm
│ └─pve-vz 252:4 0 200G 0 lvm /vz
└─pve-data_tdata 252:1 0 5.5T 0 lvm
└─pve-data-tpool 252:2 0 5.5T 0 lvm
├─pve-data 252:3 0 5.5T 1 lvm
└─pve-vz 252:4 0 200G 0 lvm /vz
sdb 8:16 0 223.6G 0 disk
├─sdb1 8:17 0 1007K 0 part
├─sdb2 8:18 0 1G 0 part /boot/efi
└─sdb3 8:19 0 222.6G 0 part
├─pve-swap 252:5 0 8G 0 lvm [SWAP]
└─pve-root 252:6 0 214.6G 0 lvm /
sdc 8:32 1 14.6G 0 disk
└─sdc1 8:33 1 14.6G 0 part /backup_pve
Code:
root@pve:~# blkid
/dev/sdb2: UUID="01F3-92A4" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="7bdd3b4f-3b48-4636-bf2f-23f0c3e210bc"
/dev/sdb3: UUID="xeBhlM-XCAT-tPxw-zqSk-y15n-3iGq-dp2d3U" TYPE="LVM2_member" PARTUUID="c1930308-6df6-47b7-8bdb-e1972874f33a"
/dev/mapper/pve-vz: UUID="995e33f3-521d-4c6c-9040-69cd0c50c811" BLOCK_SIZE="512" TYPE="xfs"
/dev/sda1: UUID="qUlOLp-nu1c-8Isk-gNHA-X7sa-x1k3-blgcKk" TYPE="LVM2_member" PARTLABEL="Linux LVM" PARTUUID="3807b283-d201-400f-a20e-19908e2a040c"
/dev/sdb1: PARTUUID="62687e52-ddb9-4208-8b9b-a67deaa80038"
/dev/mapper/pve-root: UUID="c969768a-71a2-467d-8fa2-8db973938d26" BLOCK_SIZE="4096" TYPE="xfs"
/dev/sdc1: UUID="ab9ba017-af58-4a73-9fa5-d0337edc7657" BLOCK_SIZE="512" TYPE="xfs" PARTLABEL="Linux filesystem" PARTUUID="062bb37b-9aad-4d1c-ad93-e10bcacd5bf3"
/dev/mapper/pve-swap: UUID="c2771290-d4a3-413a-be27-df122c61d850" TYPE="swap"
Code:
root@pve:~# pvs
PV VG Fmt Attr PSize PFree
/dev/sda1 pve lvm2 a-- <5.46t 0
/dev/sdb3 pve lvm2 a-- <222.57g 0
root@pve:~# vgs
VG #PV #LV #SN Attr VSize VFree
pve 2 4 0 wz--n- <5.68t 0
root@pve:~# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
data pve twi-aotz-- <5.46t 0.11 10.46
root pve -wi-ao---- <214.57g
swap pve -wi-ao---- 8.00g
vz pve Vwi-aotz-- 200.00g data 3.09As you can see, the PV indicated as missing at startup is present. Despite this, I still get those warnings on startup.
This is the PV that contained the LVs root, swap, and data and now correctly contains only root and swap.
Thank you in advance for your valuable support,
MC