Liebes Forum,
nach eine Host Reboot kommen mein OVS Netzwerk nicht mehr hoch...
Hier ein paar Infos:
Hat jemand eine Idee ?
Vielen Dank !
nach eine Host Reboot kommen mein OVS Netzwerk nicht mehr hoch...
Hier ein paar Infos:
Code:
root@pve:~# apt install openvswitch-switch
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
openvswitch-switch is already the newest version (2.15.0+ds1-2).
The following packages were automatically installed and are no longer required:
bsdmainutils libatomic1 libdouble-conversion1 libllvm7
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@pve:~# dpkg -l openvswitch-*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==========================-============-============-===================================
ii openvswitch-common 2.15.0+ds1-2 amd64 Open vSwitch common components
ii openvswitch-switch 2.15.0+ds1-2 amd64 Open vSwitch switch implementations
un openvswitch-test <none> <none> (no description available)
un openvswitch-testcontroller <none> <none> (no description available)
un openvswitch-vtep <none> <none> (no description available)
root@pve:~#
Code:
root@pve:/etc/network# more interfaces
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
auto lo
iface lo inet loopback
auto eno1
iface eno1 inet manual
auto enp1s0f0
iface enp1s0f0 inet manual
auto enp1s0f1
iface enp1s0f1 inet manual
allow-vmbr1 vlan010_internal
iface vlan010_internal inet static
address 192.168.10.0/24
ovs_type OVSIntPort
ovs_bridge vmbr1
ovs_options tag=10
allow-vmbr1 vlan050_home
iface vlan050_home inet static
address 192.168.50.0/24
ovs_type OVSIntPort
ovs_bridge vmbr1
ovs_options tag=50
allow-vmbr1 vlan060_development
iface vlan060_development inet static
address 192.168.60.0/28
ovs_type OVSIntPort
ovs_bridge vmbr1
ovs_options tag=60
allow-vmbr1 bond0
iface bond0 inet manual
ovs_bonds enp1s0f0 enp1s0f1
ovs_type OVSBond
ovs_bridge vmbr1
ovs_options lacp=active bond_mode=balance-tcp other_config:lacp-time=fast
auto vmbr0
iface vmbr0 inet static
address 192.168.0.50/24
gateway 192.168.0.1
bridge-ports eno1
bridge-stp off
bridge-fd 0
allow-ovs vmbr1
iface vmbr1 inet manual
ovs_type OVSBridge
ovs_ports bond0 vlan010_internal vlan050_home vlan060_development
root@pve:/etc/network#Hat jemand eine Idee ?
Vielen Dank !