Hello from a bloody beginner!
I have a container with ubuntu server and try to passthrough some USB devices.
Unfortunately it do not work.
The devices are connected via USB hub to my Intel Nuc.
On Proxmox host I have the following devices:
Now I added the devices via ALIAS to /etc/udev/rules.d/99-usb-serial.rules:
When I check in host via "ls -la /dev/" I get only 4 from 5 devices:
cul is missing. why?
Then I put all symlinks into
/etc/pve/lxc/100.conf:
I restarted both: host and guest.
When I try to find the devices in the Container via
ls -la /dev/
there are no devices
When I do
lsusb
I can see my devices on guest system:
BUT, when I do
lsusb -vs 001:005
I get some information, beginning with an error message
Can you please help me to passthrough my 5 USB devices?
P.S. Are there no code tags in the forum? (ok, first issue is solved: I found the code tags ;-) )
I have a container with ubuntu server and try to passthrough some USB devices.
Unfortunately it do not work.
The devices are connected via USB hub to my Intel Nuc.
On Proxmox host I have the following devices:
Code:
ZWAVE
root@proxmox:~# ls -la /dev/ttyACM*
crw-rw---- 1 root dialout 166, 0 Jan 13 11:55 /dev/ttyACM0
Bus 001 Device 020: ID 0658:0200 Sigma Designs, Inc.
Viessmann Optokoppler
crw-rw---- 1 root dialout 188, 0 Jan 13 12:01 /dev/ttyUSB0
Bus 001 Device 021: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Lacrosse Jeelink
Bus 001 Device 022: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
crw-rw---- 1 root dialout 188, 1 Jan 13 12:03 /dev/ttyUSB1
mit Cul868 (Attention: This device is connected via LAN-USB-LAN connector (appr. 12 Meter Cat7)
Bus 001 Device 023: ID 03eb:204b Atmel Corp. LUFA USB to Serial Adapter Project
crw-rw---- 1 root dialout 166, 1 Jan 13 12:05 /dev/ttyACM1
mit OWL Strommesser
Bus 001 Device 025: ID 0fde:ca05 Oregon Scientific CM160
crw-rw---- 1 root dialout 188, 2 Jan 13 12:14 /dev/ttyUSB2Now I added the devices via ALIAS to /etc/udev/rules.d/99-usb-serial.rules:
Code:
SUBSYSTEM=="tty", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200", SYMLINK+="zwave"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="A900WVZZ", SYMLINK+="viessmann"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="AL01MZ4B", SYMLINK+="jeelink"
SUBSYSTEM=="tty", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204b", SYMLINK+="cul"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0fde", ATTRS{idProduct}=="ca05", ATTRS{serial}=="0077CF1A", SYMLINK+="owl160"When I check in host via "ls -la /dev/" I get only 4 from 5 devices:
Code:
lrwxrwxrwx 1 root root 7 Jan 13 17:27 jeelink -> ttyUSB1
lrwxrwxrwx 1 root root 7 Jan 13 17:27 owl160 -> ttyUSB2
lrwxrwxrwx 1 root root 7 Jan 13 17:27 viessmann -> ttyUSB0
lrwxrwxrwx 1 root root 7 Jan 13 17:27 zwave -> ttyACM0cul is missing. why?
Then I put all symlinks into
/etc/pve/lxc/100.conf:
Code:
arch: amd64
cores: 4
hostname: fhem-container
memory: 4192
net0: name=eth0,bridge=vmbr0,gw=192.168.0.1,hwaddr=52:7E:2B:F2:EE:2A,ip=192.168.0.25/24,ip6=dhcp,type=veth
onboot: 1
ostype: ubuntu
parent: rohinstallation
rootfs: local-lvm:vm-100-disk-1,size=40G
swap: 2048
tty: 6
[rohinstallation]
#Ubuntu, User PI mit sudo
#FTP
#Samba
#FHEM
arch: amd64
cores: 4
hostname: fhem-container
memory: 4192
net0: name=eth0,bridge=vmbr0,gw=192.168.0.1,hwaddr=52:7E:2B:F2:EE:2A,ip=192.168.0.25/24,ip6=dhcp,type=veth
onboot: 1
ostype: ubuntu
rootfs: local-lvm:vm-100-disk-1,size=40G
snaptime: 1515795543
swap: 2048
lxc.mount.entry = /dev/serial/by-id/ dev/serial/by-id none bind,optional,create=dir
# lxc.aa_profile: unconfined
lxc.cgroup.devices.allow = c 166:* rwm
lxc.cgroup.devices.allow = c 188:* rwm
lxc.mount.entry = /dev/zwave dev/zwave none bind,optional,create=dir
lxc.mount.entry = /dev/viessmann dev/viessmann none bind,optional,create=dir
lxc.mount.entry = /dev/jeelink dev/jeelink none bind,optional,create=dir
lxc.mount.entry = /dev/cul dev/cul none bind,optional,create=dir
lxc.mount.entry = /dev/owl160 dev/owl160 none bind,optional,create=dirI restarted both: host and guest.
When I try to find the devices in the Container via
ls -la /dev/
there are no devices
When I do
lsusb
I can see my devices on guest system:
Code:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 009: ID 03eb:204b Atmel Corp. LUFA USB to Serial Adapter Project
Bus 001 Device 008: ID 0fde:ca05 Oregon Scientific CM160
Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 006: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 005: ID 0658:0200 Sigma Designs, Inc.
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBUT, when I do
lsusb -vs 001:005
I get some information, beginning with an error message
Code:
Bus 001 Device 005: ID 0658:0200 Sigma Designs, Inc.
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0658 Sigma Designs, Inc.
idProduct 0x0200
bcdDevice 0.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC ACM:
bmCapabilities 0x00
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 32
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 0Can you please help me to passthrough my 5 USB devices?
P.S. Are there no code tags in the forum? (ok, first issue is solved: I found the code tags ;-) )
Last edited:
