I am running Proxmox 8.2.2 on a Minisforum um790pro with kernel 6.8.
I cannot access devices on USB 3.2 ports to pass through to a VM.
I have booted from a USB attached to these ports, and a keyboard attached to the ports also works in the BIOS, so I don't think it is a hardware issue.
I can access the same USB devices when they are attached to the USB 4 ports.
<lsusb> shows the ports but not any devices that are attached to USB 3.2 ports.
This is the output of <dmesg | grep usb> is:
Any help would be greatly appreciated!
UPDATE:
I have also run Ubuntu from USB and all devices are recognised when doing so
I cannot access devices on USB 3.2 ports to pass through to a VM.
I have booted from a USB attached to these ports, and a keyboard attached to the ports also works in the BIOS, so I don't think it is a hardware issue.
I can access the same USB devices when they are attached to the USB 4 ports.
<lsusb> shows the ports but not any devices that are attached to USB 3.2 ports.
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 007 Device 002: ID 10c4:ea60 Silicon Labs CP210x UART BridgeBus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 005 Device 002: ID 0bda:a729 Realtek Semiconductor Corp. Bluetooth 5.3 RadioBus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubBus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubroot@proxmox1:~# pveversionThis is the output of <dmesg | grep usb> is:
root@proxmox1:~# dmesg | grep usb[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.4-3-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on usbcore.autosuspend=-1[ 0.040065] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.4-3-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on usbcore.autosuspend=-1[ 0.364684] usbcore: registered new interface driver usbfs[ 0.364689] usbcore: registered new interface driver hub[ 0.364697] usbcore: registered new device driver usb[ 0.935737] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08[ 0.935739] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.935741] usb usb1: Product: xHCI Host Controller[ 0.935742] usb usb1: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.935743] usb usb1: SerialNumber: 0000:c4:00.3[ 0.938358] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.[ 0.938375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08[ 0.938376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.938378] usb usb2: Product: xHCI Host Controller[ 0.938379] usb usb2: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.938380] usb usb2: SerialNumber: 0000:c4:00.3[ 0.939294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08[ 0.939296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.939297] usb usb3: Product: xHCI Host Controller[ 0.939298] usb usb3: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.939299] usb usb3: SerialNumber: 0000:c4:00.4[ 0.940234] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.[ 0.940251] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08[ 0.940252] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.940253] usb usb4: Product: xHCI Host Controller[ 0.940254] usb usb4: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.940255] usb usb4: SerialNumber: 0000:c4:00.4[ 0.942000] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08[ 0.942001] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.942003] usb usb5: Product: xHCI Host Controller[ 0.942004] usb usb5: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.942005] usb usb5: SerialNumber: 0000:c6:00.3[ 0.943046] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.[ 0.943067] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08[ 0.943068] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.943070] usb usb6: Product: xHCI Host Controller[ 0.943071] usb usb6: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.943072] usb usb6: SerialNumber: 0000:c6:00.3[ 0.945147] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08[ 0.945149] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.945150] usb usb7: Product: xHCI Host Controller[ 0.945151] usb usb7: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.945152] usb usb7: SerialNumber: 0000:c6:00.4[ 0.946212] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.[ 0.946229] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08[ 0.946230] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.946231] usb usb8: Product: xHCI Host Controller[ 0.946232] usb usb8: Manufacturer: Linux 6.8.4-3-pve xhci-hcd[ 0.946233] usb usb8: SerialNumber: 0000:c6:00.4[ 1.183348] usb 1-1: new high-speed USB device number 2 using xhci_hcd[ 1.183364] usb 5-1: new full-speed USB device number 2 using xhci_hcd[ 1.189417] usb 7-1: new full-speed USB device number 2 using xhci_hcd[ 1.313162] usb 1-1: New USB device found, idVendor=2109, idProduct=2822, bcdDevice=90.13[ 1.313166] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.313168] usb 1-1: Product: USB2.0 Hub[ 1.313170] usb 1-1: Manufacturer: VIA Labs, Inc.[ 1.313172] usb 1-1: SerialNumber: 000000001[ 1.329976] usb 5-1: New USB device found, idVendor=0bda, idProduct=a729, bcdDevice= 2.00[ 1.329979] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.329981] usb 5-1: Product: Bluetooth 5.3 Radio[ 1.329983] usb 5-1: Manufacturer: Realtek[ 1.329984] usb 5-1: SerialNumber: 00E04C239987[ 1.342137] usb 7-1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00[ 1.342140] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.342142] usb 7-1: Product: SkyConnect v1.0[ 1.342144] usb 7-1: Manufacturer: Nabu Casa[ 1.342146] usb 7-1: SerialNumber: b411e67da591ed11abc4c8d13b20a988[ 1.448847] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd[ 1.507762] usb 2-1: New USB device found, idVendor=2109, idProduct=0822, bcdDevice=90.13[ 1.507766] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.507767] usb 2-1: Product: USB3.1 Hub[ 1.507769] usb 2-1: Manufacturer: VIA Labs, Inc.[ 1.507770] usb 2-1: SerialNumber: 000000001[ 1.620829] usb 1-2: new high-speed USB device number 3 using xhci_hcd[ 1.752414] usb 1-2: New USB device found, idVendor=2109, idProduct=2822, bcdDevice=90.13[ 1.752419] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.752421] usb 1-2: Product: USB2.0 Hub[ 1.752423] usb 1-2: Manufacturer: VIA Labs, Inc.[ 1.752425] usb 1-2: SerialNumber: 000000001[ 1.863842] usb 2-2: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd[ 1.865649] usb: port power management may be unreliable[ 1.955206] usb 2-2: New USB device found, idVendor=2109, idProduct=0822, bcdDevice=90.13[ 1.955211] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3[ 1.955213] usb 2-2: Product: USB3.1 Hub[ 1.955214] usb 2-2: Manufacturer: VIA Labs, Inc.[ 1.955216] usb 2-2: SerialNumber: 000000001[ 2.068330] usb 1-5: new full-speed USB device number 4 using xhci_hcd[ 2.225701] usb 1-5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00[ 2.225706] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 2.339350] usb 1-1.1: new full-speed USB device number 5 using xhci_hcd[ 2.502094] usbcore: registered new interface driver usbserial_generic[ 2.502350] usbserial: USB Serial support registered for generic[ 2.504751] usbcore: registered new interface driver cp210x[ 2.504773] usbserial: USB Serial support registered for cp210x[ 2.505704] usb 1-1.1: New USB device found, idVendor=4b42, idProduct=0011, bcdDevice= 0.01[ 2.505708] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 2.505710] usb 1-1.1: Product: TIGER80[ 2.505711] usb 1-1.1: Manufacturer: KBDFANS[ 2.513842] usb 7-1: cp210x converter now attached to ttyUSB0[ 2.664887] usbcore: registered new interface driver btusb[ 2.697162] usb 1-5: USB disconnect, device number 4[ 3.083352] usb 1-5: new full-speed USB device number 6 using xhci_hcd[ 3.239712] usb 1-5: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00[ 3.239716] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 3.759812] usbcore: registered new interface driver usbhid[ 3.759815] usbhid: USB HID core driver[ 3.760922] usbcore: registered new interface driver usbkbd[ 3.763219] input: KBDFANS TIGER80 as /devices/pci0000:00/0000:00:08.1/0000:c4:00.3/usb1/1-1/1-1.1/1-1.1:1.0/0003:4B42:0011.0001/input/input10[ 3.814594] hid-generic 0003:4B42:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [KBDFANS TIGER80] on usb-0000:c4:00.3-1.1/input0[ 3.814727] hid-generic 0003:4B42:0011.0002: hiddev0,hidraw1: USB HID v1.11 Device [KBDFANS TIGER80] on usb-0000:c4:00.3-1.1/input1[ 3.814877] input: KBDFANS TIGER80 Mouse as /devices/pci0000:00/0000:00:08.1/0000:c4:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:4B42:0011.0003/input/input11[ 3.814964] input: KBDFANS TIGER80 System Control as /devices/pci0000:00/0000:00:08.1/0000:c4:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:4B42:0011.0003/input/input12[ 3.866435] input: KBDFANS TIGER80 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:c4:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:4B42:0011.0003/input/input13[ 3.866500] input: KBDFANS TIGER80 Keyboard as /devices/pci0000:00/0000:00:08.1/0000:c4:00.3/usb1/1-1/1-1.1/1-1.1:1.2/0003:4B42:0011.0003/input/input14[ 3.866711] hid-generic 0003:4B42:0011.0003: input,hidraw2: USB HID v1.11 Mouse [KBDFANS TIGER80] on usb-0000:c4:00.3-1.1/input2[ 11.157508] usb usb2: USB disconnect, device number 1[ 11.157510] usb 2-1: USB disconnect, device number 2[ 11.159769] usb 2-2: USB disconnect, device number 3[ 11.176797] usb usb1: USB disconnect, device number 1[ 11.176799] usb 1-1: USB disconnect, device number 2[ 11.176801] usb 1-1.1: USB disconnect, device number 5[ 11.591786] usb 1-2: USB disconnect, device number 3[ 11.623783] usb 1-5: USB disconnect, device number 6Any help would be greatly appreciated!
UPDATE:
I have also run Ubuntu from USB and all devices are recognised when doing so
Last edited: