Hi,
I am not sure if this has been reported.
I've encountered a scenario where I see two cdrom devices reported in the boot screen and the OS. It seems that if you have two devices on IDE bus 0 and you have none on bus 1, you will encounter this.
To reproduce in GUI:
1. Create a KVM vm; just enter a vm name and leave everything as default
2. Add a second cdrom device, IDE 0:1
3. Delete the first cdrom device, IDE 1:0
4. Start the vm and you should see the boot screen display two cdrom devices
I am not sure if this has been reported.
I've encountered a scenario where I see two cdrom devices reported in the boot screen and the OS. It seems that if you have two devices on IDE bus 0 and you have none on bus 1, you will encounter this.
To reproduce in GUI:
1. Create a KVM vm; just enter a vm name and leave everything as default
2. Add a second cdrom device, IDE 0:1
3. Delete the first cdrom device, IDE 1:0
4. Start the vm and you should see the boot screen display two cdrom devices
Code:
proxmox:/etc/qemu-server# pveversion -v
pve-manager: 1.5-8 (pve-manager/1.5/4674)
running kernel: 2.6.32-1-pve
proxmox-ve-2.6.32: 1.5-4
pve-kernel-2.6.32-1-pve: 2.6.32-4
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-11
pve-firmware: 1.0-3
libpve-storage-perl: 1.0-10
vncterm: 0.9-2
vzctl: 3.0.23-1pve8
vzdump: 1.2-5
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.11.1-2
ksm-control-daemon: 1.0-3
Code:
proxmox:/etc/qemu-server# cat ./106.conf
name: test
vlan0: rtl8139=7A:0D:9F:A2:8F:68
bootdisk: ide0
ostype: other
ide0: local:106/vm-106-disk-1.raw
memory: 512
sockets: 1
ide1: cdrom,media=cdrom