The problem with WEB-GUI

[ninoo]

Hello
I have a big problem with proxmox.I use this configuration :


and use pfsense on 192.168.100.1 connect to the switch L3.
I connect local (Ip local 192.168.100.30 ) I see the Web GUI with the address :https://192.168.100.2:8006
If I use connect local with vlan of pfsense (For example ipi local 192.168.2.10 ) I don't see the Web Gui at the adress https://192.168.100.2:8006
From the local ipi 192.168.2.10 ping 192.168.100.2 is ok and the traceroute is ok .
Where is the problem ? I think the configuration of proxmox
Do you help me , please ?

 

[oguz]

hi,

Where is the problem ? I think the configuration of proxmox

do you have the firewall enabled on PVE? maybe you have to allow the other subnet to reach port 8006

 

[wahli]

I have the same problem after clean installation of proxmox ve 6.3 on Intel NUC8 i3. This was my first installation of proxmox and I saw some videos on youtube and everything works fine.

How can I check if the firewall is enabled?
Where can I find the firewall configuration?

This command:
curl -s -k https://myproxmoxip:8006/
works on the proxmox machine and i can see a response.
On other computers there is no response.

 

[NathanD]

How did you install this? A plain Debian install with manualy added Proxmox to it, or from the Proxmox ISO? On the cli of the Proxmox server you can check with iptables -L -v what the rules are (if there is any).

 

[wahli]

I use the iso image with usb stick.
I test the iptables command later.

 

[wahli]

It was un IP conflict.
After changing to a free IP everything works fine.