Hi!
Speed problem From VE to Qnap 400-500 MBytes | From Qnap to VE all ok 1.1 GBytes
So where i need first look to solve this speed problem ...?
Speed problem From VE to Qnap 400-500 MBytes | From Qnap to VE all ok 1.1 GBytes
Code:
[~] # iperf3 -c 10.10.0.10 -p 7575
Connecting to host 10.10.0.10, port 7575
[ 5] local 10.10.0.41 port 49382 connected to 10.10.0.10 port 7575
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.10 GBytes 9.43 Gbits/sec 0 833 KBytes
[ 5] 1.00-2.00 sec 1.07 GBytes 9.19 Gbits/sec 0 877 KBytes
[ 5] 2.00-3.00 sec 1.10 GBytes 9.42 Gbits/sec 0 877 KBytes
[ 5] 3.00-4.00 sec 1.09 GBytes 9.40 Gbits/sec 0 877 KBytes
[ 5] 4.00-5.00 sec 1.09 GBytes 9.41 Gbits/sec 0 877 KBytes
[ 5] 5.00-6.00 sec 1.09 GBytes 9.39 Gbits/sec 0 877 KBytes
[ 5] 6.00-7.00 sec 1.09 GBytes 9.37 Gbits/sec 0 877 KBytes
[ 5] 7.00-8.00 sec 1.09 GBytes 9.36 Gbits/sec 0 928 KBytes
[ 5] 8.00-9.00 sec 1.10 GBytes 9.41 Gbits/sec 0 928 KBytes
[ 5] 9.00-10.00 sec 1.09 GBytes 9.34 Gbits/sec 0 1008 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.9 GBytes 9.37 Gbits/sec 0 sender
[ 5] 0.00-10.03 sec 10.9 GBytes 9.33 Gbits/sec receiver
iperf Done.
[~] # iperf3 -s -p 7575
-----------------------------------------------------------
Server listening on 7575 (test #1)
-----------------------------------------------------------
Accepted connection from 10.10.0.10, port 38512
[ 5] local 10.10.0.41 port 7575 connected to 10.10.0.10 port 38526
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 475 MBytes 3.98 Gbits/sec
[ 5] 1.00-2.00 sec 366 MBytes 3.07 Gbits/sec
[ 5] 2.00-3.00 sec 381 MBytes 3.19 Gbits/sec
[ 5] 3.00-4.00 sec 449 MBytes 3.77 Gbits/sec
[ 5] 4.00-5.00 sec 407 MBytes 3.41 Gbits/sec
[ 5] 5.00-6.00 sec 383 MBytes 3.21 Gbits/sec
[ 5] 6.00-7.00 sec 505 MBytes 4.24 Gbits/sec
[ 5] 7.00-8.00 sec 798 MBytes 6.69 Gbits/sec
[ 5] 8.00-9.00 sec 534 MBytes 4.49 Gbits/sec
[ 5] 9.00-10.00 sec 518 MBytes 4.35 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -So where i need first look to solve this speed problem ...?