Specifiying an usb bus, how ?

[Lindemann]

Hello @all,

>qm start 101

with hostusb: 057c:1900 leads to

>usb_create: no bus specified, using "usb.0" for "usb-host"

Something reports no specifiying at all, but how do i do it, how do i can specify an usb bus ?

Thanks for replying.
Lindemann

 

[dietmar]

What is the output of:

# pveversion -v

and

# lsusb

 

[Lindemann]

Hi Dietmar,

lsusb:

Bus 004 Device 002: ID 057c:1900 AVM GmbH ISDN-Controller FRITZ!Card v2.1
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 03f0:1027 Hewlett-Packard
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

pveversion:

pve-manager: 1.8-18 (pve-manager/1.8/6070)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.8-33
pve-kernel-2.6.32-4-pve: 2.6.32-33
qemu-server: 1.1-30
pve-firmware: 1.0-11
libpve-storage-perl: 1.0-17
vncterm: 0.9-2
vzctl: 3.0.27-1pve1
vzdump: 1.2-13
vzprocps: 2.0.11-2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.14.1-1
ksm-control-daemon: 1.0-6

Another config question; is there a way to configure a command on the webgui, before starting a vm and afterwards stopping the vm ? If not, can you put it on the wishlist for V2.0 ? ;-)

Thanks
Lindemann

 

[dietmar]

H
>usb_create: no bus specified, using "usb.0" for "usb-host"

That seem to be an informational message - or do you get an error?

 

[dietmar]

Another config question; is there a way to configure a command on the webgui, before starting a vm and afterwards stopping the vm ? If not, can you put it on the wishlist for V2.0 ? ;-)

No, currently not. But it is already on the TODO list for 2.X

 

[Lindemann]

That seem to be an informational message - or do you get an error?

... seems so, no errors. But i thought, with specifiying the bus, i could solve my other problem, as i asked last week.

Thanks.
L.

 

[Lindemann]

No, currently not. But it is already on the TODO list for 2.X

Probably usb stack will work better then. In the meanwhile - it is a workaround for me- i have to use some sort of serial on/off relais-cards to cut off the usb-cable electronically before starting the vm.

Thanks
L.