[SOLVED] Use specific interface for outbound connections

[Unknown2k]

Good Morning.
I hope there is a networking Guru browsing the forums this morning. I have an issue that I just can't resolve.

I have a proxmox deployment with 2x physical NICs.

NIC-1 eth0 (vmbr0) is attached to the internet and has been assigned a static address.
NIC-2 eth1 (vmbr1) is attached to a local switch, with a few other servers.
Network Info 192.168.1.x

I have a Web-Server listening on NIC-1 and several additional VMs I am using as part of a load balancing node.

Web-Server (proxy, load balancing)
ETH0 Internet IP
ETH1 192.168.1.2

Web-Server Node1 VM
ETH1 192.168.1.3

Web-Server Node2 VM
ETH1 192.168.1.4

All the VM's can talk to each other via the 192.168.1.x addresses

The Web-Server itself is reachable via the Internet IP.

My trouble is, my Nodes can't get out to the internet.

Here is the route -n from one of the nodes.

Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1

My Question:
How do I route Internet requests from the nodes to ETH0 and out to the internet?

 

[Unknown2k]

Would i set the 192.168.1.2 address as the default GW?

 

[Unknown2k]

FIxed this. I setup Masquerade via one of the bridges and used that interface address as the gateway.