*solved* Proxmox VE 9.0.10 - Old IPs displayed in Web-UI Cluster Information after updating secondary link

[devaux]

Hi everyone,I've recently updated the secondary link (ring1_addr) for my Proxmox VE 9.0.10 cluster network and adjusted the configuration on all nodes accordingly. The cluster communication is working perfectly, and everything seems fine operationally. I've verified this with the following checks:

• pvecm status shows the correct status and communication.
• corosync-cfgtool -s confirms the updated IPs for the secondary link.
• The corosync.conf file correctly reflects the new ring1_addr IPs.
• All nodes have been rebooted to ensure changes take effect.

However, in the Proxmox Web-UI under Cluster Information, the old IPs are still displayed for Link1, despite all other indications showing the new configuration is active.
Has anyone encountered this issue before? Is this a known bug in Proxmox VE 9.0.10, or is there a specific step I might have missed to refresh the Web-UI display?
Any suggestions on how to resolve this or force the UI to update the displayed IPs would be greatly appreciated!
Thanks in advance for your help!

*SOLVED* Somehow it's show correctly after rebooting the nodes again(?).

 

[bbgeek17]

*SOLVED* Somehow it's show correctly after rebooting the nodes again(?).

In PVE this service updates the text file that displays the login banner:

systemctl |grep bann
  pvebanner.service                                                                    loaded active     exited    Proxmox VE Login Banner

Reboot likely triggered the re-write of the file.

You can mark the thread as solved by editing the drop-down of the subject, if you wish.

Cheers

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox