Good Day All,
We receintly upgraded our servers from HDDs to SSDs for vm storage but one of them is giving us smart errors for 2 of the removed drives.
See below from one of the drives.
How do we go about resolving this error.
We receintly upgraded our servers from HDDs to SSDs for vm storage but one of them is giving us smart errors for 2 of the removed drives.
See below from one of the drives.
How do we go about resolving this error.
Code:
This message was generated by the smartd daemon running on:
host name: --
DNS domain: --
The following warning/error was logged by the smartd daemon:
Device: /dev/sde [SAT], failed to read SMART Attribute Data
Device info:
WDC WD10JFCX-68N6GN0, S/N:WD-WXC1A68AJRZU, WWN:5-0014ee-265967ee4, FW:82.00A82, 1.00 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Thu Mar 6 14:03:26 2025 EST
Another message will be sent in 24 hours if the problem persists.
Code:
This message was generated by the smartd daemon running on:
host name: --
DNS domain: --
The following warning/error was logged by the smartd daemon:
Device: /dev/sdf [SAT], failed to read SMART Attribute Data
Device info:
WDC WD10JFCX-68N6GN0, S/N:WD-WXC1A68AJF53, WWN:5-0014ee-2baec2cce, FW:82.00A82, 1.00 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Thu Mar 6 14:03:26 2025 EST
Another message will be sent in 24 hours if the problem persists.