We've been receiving the below error message, for a few days, in one of our two mirrored SSD drives. Is there a way to correct this? Do we need to worry about it?
We talked with Dell support and they were able to determine by looking at iDRAC, that the hard drives on the server are fine. We updated the hard drive firmware, using iDRAC, on Dell's advise.
---------- Forwarded message ---------
From: root <root@ server1.domain.local >
Date: Mon, Sep 5, 2022 at 8:15 AM
Subject: SMART error (OfflineUncorrectableSector) detected on host: server1
To: <root@server1.domain.local>
This message was generated by the smartd daemon running on:
host name: server1
DNS domain: domain.local
The following warning/error was logged by the smartd daemon:
Device: /dev/bus/0 [megaraid_disk_00] [SAT], 120 Offline uncorrectable sectors
Device info:
HFS1T9G32FEH-7A10A, S/N: {serial_number_deleted} , 1.92 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Thu Jun 30 07:25:58 2022 WAT
Another message will be sent in 24 hours if the problem persists.
We talked with Dell support and they were able to determine by looking at iDRAC, that the hard drives on the server are fine. We updated the hard drive firmware, using iDRAC, on Dell's advise.
---------- Forwarded message ---------
From: root <root@ server1.domain.local >
Date: Mon, Sep 5, 2022 at 8:15 AM
Subject: SMART error (OfflineUncorrectableSector) detected on host: server1
To: <root@server1.domain.local>
This message was generated by the smartd daemon running on:
host name: server1
DNS domain: domain.local
The following warning/error was logged by the smartd daemon:
Device: /dev/bus/0 [megaraid_disk_00] [SAT], 120 Offline uncorrectable sectors
Device info:
HFS1T9G32FEH-7A10A, S/N: {serial_number_deleted} , 1.92 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Thu Jun 30 07:25:58 2022 WAT
Another message will be sent in 24 hours if the problem persists.