Setting DNAT rules by GUI: Is it possible?

[martux69]

Hi,
I do my first steps with CT, firewalling and one public ip address. I find a lot of very helpful information here for setting dnat rules in /etc/network/interfaces. But for my understanding: Is this only possible by using CLI or can I set and/or view the necessary DNAT rules also by using the web GUI? If so, how? (Still now, I didn't find any hints how to do this).
Kind regards

 

[Richard]

Hi,
I do my first steps with CT, firewalling and one public ip address. I find a lot of very helpful information here for setting dnat rules in /etc/network/interfaces. But for my understanding: Is this only possible by using CLI or can I set and/or view the necessary DNAT rules also by using the web GUI? If so, how? (Still now, I didn't find any hints how to do this).
Kind regards

No, nat tables cannot be set via Proxmox WEB GUI, but would be an interesting new feature, feel free to open en "enhancement" entry in https://bugzilla.proxmox.com/ in order to stress such a request; however: no problem to set them by `iptables -t nat` command, it will not have any impact on possibly vi WEB GUO configured firewall rules.