Select WEB interface

[milew]

Hi
My host is called pve0. It has two network interfaces.
Proxmox GUI reports to me on the first address entered in /etc/hosts, i.e. in this case 10.0.0.1. Could I set it up so that it reports on the address 192.168.1.100?

root@pve0:~# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.0.0.1 pve0.example.com pve0
192.168.1.100 pve0.example.com pve0
10.0.0.2 pve1.example.com pve1

# The following lines are desirable for IPv6 capable hosts

::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

 

[B.Otto]

What do you mean by 'report on an ip address'? I think by default the PVE GUI is accessible through all interfaces that have an IP address assigned to PVE.

 

[milew]

Yes, you are right. I checked everything again and it turned out that the firewall operates in such a way that it opens port 8006 only on the first interface found in /etc/hosts. You need to additionally open the ports on other interfaces.