Hello Everyone,
I am trying to establish VXLAN tunnel E-W with external device and ran into issue where destination port is not match.
Version Proxmox 8.1
Is there are way to specify the port number ?
dstport 4789 where are standard port 8472
Here are example
I am trying to establish VXLAN tunnel E-W with external device and ran into issue where destination port is not match.
Version Proxmox 8.1
Is there are way to specify the port number ?
dstport 4789 where are standard port 8472
Here are example
Code:
:~# cat /etc/network/interfaces.d/sdn
#version:4
auto VnetV45
iface VnetV45
bridge_ports vxlan_VnetV45
bridge_stp off
bridge_fd 0
bridge-vlan-aware yes
bridge-vids 2-4094
mtu 1450
auto vxlan_VnetV45
iface vxlan_VnetV45
vxlan-id 45
vxlan_remoteip 172.12.254.2
mtu 1450
Code:
ip -d link show vxlan_VnetV45
9: vxlan_VnetV45: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue master VnetV45 state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 8e:af:29:b6:9d:fa brd ff:ff:ff:ff:ff:ff promiscuity 1 allmulti 1 minmtu 68 maxmtu 65535
vxlan id 45 srcport 0 0 dstport 4789 ttl auto ageing 300 udpcsum noudp6zerocsumtx noudp6zerocsumrx
bridge_slave state forwarding priority 32 cost 100 hairpin off guard off root_block off fastleave off learning on flood on port_id 0x8001 port_no 0x1 designated_port 32769 designated_cost 0 designated_bridge 8000.8e:af:29:b6:9d:fa designated_root 8000.8e:af:29:b6:9d:fa hold_timer 0.00 message_age_timer 0.00 forward_delay_timer 0.00 topology_change_ack 0 config_pending 0 proxy_arp off proxy_arp_wifi off mcast_router 2 mcast_fast_leave off mcast_flood on bcast_flood on mcast_to_unicast off neigh_suppress off group_fwd_mask 0 group_fwd_mask_str 0x0 vlan_tunnel off isolated off locked off addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 tso_max_size 65536 tso_max_segs 65535 gro_max_size 65536