[SOLVED] Restore vom Backup

[PhUser]

Hallo,

ich habe ein Problem mit einem Backup eines Proxmox LXC. Ich kann den Container aus einem Backup nicht wieder herstellen.
Was kann ich tun?

Virtual Environment 6.1-7
Suche
Rechenzentrum
Server-Ansicht
Logs
()
  Logical volume "vm-110-disk-0" created.
mke2fs 1.44.5 (15-Dec-2018)
Discarding device blocks:    4096/7864320               done                           
Creating filesystem with 7864320 4k blocks and 1966080 inodes
Filesystem UUID: d3868774-7f7b-43fc-834d-e932ef1ccde4
Superblock backups stored on blocks:
    32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
    4096000

Allocating group tables:   0/240       done                           
Writing inode tables:   0/240       done                           
Creating journal (32768 blocks): done
Multiple mount protection is enabled with update interval 5 seconds.
Writing superblocks and filesystem accounting information:   0/240       done

extracting archive '/mnt/pve/ds214/dump/vzdump-lxc-103-2020_02_23-03_30_33.tar.lzo'
tar: ./var/spool/postfix/dev/random: Cannot mknod: Operation not permitted
tar: ./var/spool/postfix/dev/urandom: Cannot mknod: Operation not permitted
Total bytes read: 26420725760 (25GiB, 16MiB/s)
tar: Exiting with failure status due to previous errors
  Logical volume "vm-110-disk-0" successfully removed
TASK ERROR: unable to restore CT 110 - command 'lxc-usernsexec -m u:0:100000:65536 -m g:0:100000:65536 -- tar xpf - --lzop --totals --one-file-system -p --sparse --numeric-owner --acls --xattrs '--xattrs-include=user.*' '--xattrs-include=security.capability' '--warning=no-file-ignored' '--warning=no-xattr-write' -C /var/lib/lxc/110/rootfs --skip-old-files --anchored --exclude './dev/*'' failed: exit code 2

Im Ziel sind noch über 300 GB frei. Also genug Platz.

cat /etc/pve/storage.cfg
dir: local
path /var/lib/vz
content backup,vztmpl,iso
maxfiles 1
shared 0

lvmthin: local-lvm
thinpool data
vgname pve
content images,rootdir

nfs: ds214
export /volume2/Proxmox
path /mnt/pve/ds214
server ds214
content images,backup,vztmpl,iso,snippets
maxfiles 10
options vers=3


pveversion -v
proxmox-ve: 6.1-2 (running kernel: 5.3.18-2-pve)
pve-manager: 6.1-7 (running version: 6.1-7/13e58d5e)
pve-kernel-5.3: 6.1-5
pve-kernel-helper: 6.1-5
pve-kernel-5.0: 6.0-11
pve-kernel-4.15: 5.4-9
pve-kernel-5.3.18-2-pve: 5.3.18-2
pve-kernel-5.3.18-1-pve: 5.3.18-1
pve-kernel-5.3.13-3-pve: 5.3.13-3
pve-kernel-5.0.21-5-pve: 5.0.21-10
pve-kernel-4.15.18-21-pve: 4.15.18-48
pve-kernel-4.15.18-10-pve: 4.15.18-32
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.3-pve1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: 0.8.35+pve1
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.14-pve1
libpve-access-control: 6.0-6
libpve-apiclient-perl: 3.0-3
libpve-common-perl: 6.0-12
libpve-guest-common-perl: 3.0-3
libpve-http-server-perl: 3.0-4
libpve-storage-perl: 6.1-4
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 3.2.1-1
lxcfs: 3.0.3-pve60
novnc-pve: 1.1.0-1
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.1-3
pve-cluster: 6.1-4
pve-container: 3.0-19
pve-docs: 6.1-6
pve-edk2-firmware: 2.20191127-1
pve-firewall: 4.0-10
pve-firmware: 3.0-5
pve-ha-manager: 3.0-8
pve-i18n: 2.0-4
pve-qemu-kvm: 4.1.1-3
pve-xtermjs: 4.3.0-1
qemu-server: 6.1-6
smartmontools: 7.1-pve2
spiceterm: 3.1-1
vncterm: 1.6-1
zfsutils-linux: 0.8.3-pve1

pvs
PV VG Fmt Attr PSize PFree
/dev/sda3 pve lvm2 a-- <446.64g <16.00g

vgs
VG #PV #LV #SN Attr VSize VFree
pve 1 21 0 wz--n- <446.64g <16.00g

lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
data pve twi-aotz-- <410.27g 13.77 1.14
root pve -wi-ao---- 10.00g

 

[fireon]

Hast du das Häkchen bei "unprivilegiert" entfernt?

 

[PhUser]

Komisch. Irgendwie ist mein Post doppelt.

Aber der Tipp war richtig. Danke

 

[fireon]

Perfekt