raspberry pi compute module 5 and Compute Module 5 IO Board

[qatar2022]

dear all
i just bought raspberry pi compute module 5 and Compute Module 5 IO Board 8gb ram 32gb emmc and i install Samsung 990 PRO 1TB with Heatsink NVMe Gen 4 M.2 Internal SSD
now the challenge is how to boot from NVMe ? and how I can install proxmox on it
thanks
with regards

 

[leesteken]

and how I can install proxmox on it

Proxmox VE does not run on ARM and requires a 64-bit x86 CPU: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_system_requirements

 

[c0der]

Hi qatar2022, I have several of my own Ri-Pi5's 8GB with M.2 + PoE+ HATs with 2TB NVMe as storage, which I was curious to find out about.
So, here I found ARM64 Proxmox port:- https://github.com/jiangcuo/Proxmox-Port

(https://github.com/jiangcuo/Proxmox-Port?tab=readme-ov-file)

..And Setup Guidance here:
(https://www.xda-developers.com/install-proxmox-on-raspberry-pi/)

Personally, I would be very cautious about running any precompiled code or other resources which have not got some kind of reputation behind it.

The above URL was found via a fast cursory search, meaning I have not checked it out properly myself.. But in saying that, I have noticed there is a growing section of people now looking to do this kind of thing on Pi's even if you could manage stand Proxmox up on a Pi5 to run a few containers on it. The Repo has had some activity on it in the last 2 weeks so at least its active!
FWIW: I am yet to test this out myself..