raid controller 9341-8i

alekseys

Member
Apr 17, 2021
3
0
6
39
Hi
can not run the raid controller 9341-8i in proxmox 6.4 (Debian 10.9) in the bios UEFI is turned off, I also tried to install Debian 10.9, I tried windows, the disks are available

the last driver downloaded installed, the latest controller firmware

tell me in which direction to move


May 4 18:49:33 pve1 kernel: [ 1.325906] megaraid_sas: loading out-of-tree module taints kernel.

May 4 18:49:33 pve1 kernel: [ 1.326991] megaraid_sas 0000:07:00.0: BAR:0x1 BAR's base_addr(phys):0x0x00000000fcd00000 mapped virt_addr:0x000000004e908267

May 4 18:49:33 pve1 kernel: [ 1.326993] megaraid_sas 0000:07:00.0: FW now in Ready state

May 4 18:49:33 pve1 kernel: [ 1.326994] megaraid_sas 0000:07:00.0: 63 bit DMA mask and 32 bit consistent mask

May 4 18:49:33 pve1 kernel: [ 1.327222] megaraid_sas 0000:07:00.0: firmware supports msix : (96)

May 4 18:49:33 pve1 kernel: [ 1.327679] megaraid_sas 0000:07:00.0: requested/available msix 17/17

May 4 18:49:33 pve1 kernel: [ 1.327680] megaraid_sas 0000:07:00.0: current msix/online cpus : (17/16)

May 4 18:49:33 pve1 kernel: [ 1.327681] megaraid_sas 0000:07:00.0: RDPQ mode : (disabled)

May 4 18:49:33 pve1 kernel: [ 1.327684] megaraid_sas 0000:07:00.0: Current firmware supports maximum commands: 272 LDIO threshold: 237

May 4 18:49:33 pve1 kernel: [ 1.327738] megaraid_sas 0000:07:00.0: Configured max firmware commands: 271

May 4 18:49:33 pve1 kernel: [ 1.328041] megaraid_sas 0000:07:00.0: Performance mode :Latency

May 4 18:49:33 pve1 kernel: [ 1.328041] megaraid_sas 0000:07:00.0: FW supports sync cache : Yes

May 4 18:49:33 pve1 kernel: [ 1.328045] megaraid_sas 0000:07:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009

May 4 18:49:33 pve1 kernel: [ 1.357841] megaraid_sas 0000:07:00.0: Init cmd return status FAILED for SCSI host 0

May 4 18:49:33 pve1 kernel: [ 1.358196] megaraid_sas 0000:07:00.0: Failed from megasas_init_fw 6694
 
May 4 18:49:33 pve1 kernel: [ 1.325906] megaraid_sas: loading out-of-tree module taints kernel.
please post the errors you get without the out-of-tree driver you installed.
 
the problem was solved in the following way:

in the bios, iommu is enabled and CSM from storage devices is first the uefi driver.

/etc/default/grub

GRUB_CMDLINE_LINUX_DEFAULT="quiet iommu=soft splash"
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!