Hallo,
nach dem Update auf 6.5.11-4-pve hatte ich ständig Fehler im Log:
Ein Downgrade auf 6.2.16-19-pve hat das gelöst.
Viele Grüße
Oliver
nach dem Update auf 6.5.11-4-pve hatte ich ständig Fehler im Log:
Code:
Nov 24 08:15:02 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:15:02 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:15:02 proxmox kernel: aacraid: Host bus reset request. SCSI hang ?
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: outstanding cmd: midlevel-0
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: outstanding cmd: lowlevel-0
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: outstanding cmd: error handler-0
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: outstanding cmd: firmware-64
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: outstanding cmd: kernel-0
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: Controller reset type is 3
Nov 24 08:15:02 proxmox kernel: aacraid 0000:65:00.0: Issuing IOP reset
Nov 24 08:15:56 proxmox kernel: aacraid 0000:65:00.0: IOP reset succeeded
Nov 24 08:15:56 proxmox kernel: aacraid: Comm Interface type2 enabled
Nov 24 08:15:56 proxmox kernel: aacraid 0000:65:00.0: Scheduling bus rescan
Nov 24 08:15:56 proxmox pve-firewall[1168]: firewall update time (104.845 seconds)
Nov 24 08:15:57 proxmox pvestatd[1170]: status update time (105.800 seconds)
Nov 24 08:16:01 proxmox pve-ha-lrm[1244]: loop take too long (113 seconds)
Nov 24 08:16:01 proxmox pve-ha-crm[1235]: loop take too long (109 seconds)
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,1,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,1,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,1,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Nov 24 08:18:21 proxmox kernel: aacraid: Host adapter abort request. aacraid: Outstanding commands on (0,0,0,0):
Ein Downgrade auf 6.2.16-19-pve hat das gelöst.
Viele Grüße
Oliver